Search in Category
Fuses
Search Filters
-
Hungary x
Filter Your Search
Brand
Diameter
Fuse Size
Shop by Category
Loading...
Fuses
Power ProductsFuses
Viewing Page 9 of 61
(602 results)
NH 0 25A 500V GG SGL
Item #:
P214672
Supplier Part #: P214672
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
0% cadmium; Isolated metal gripping lugs (SGL); Dimensions according to DIN 43 620 Parts 1 to 4; Double indicator; Lead free contact blades; IEC 60269-1 and -2; VDE 0636 Part 201
$161.60
/EA
NOT CURRENTLY IN STOCK
NH 0 40A 500V gG
Item #:
P217731
Supplier Part #: P217731
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
0% cadmium; Non-isolated gripping lugs; IEC 60269-1 and -2; VDE 0636 Part 201; Double indicator; Dimensions according to DIN 43 620 parts 1 to 4; Lead free contact blades
$150.42
/EA
NOT CURRENTLY IN STOCK
690V NH1 C/P gG 125A
Item #:
P219801
Supplier Part #: P219801
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Lead free contact blades; VDE 0636 Part 201; 0% cadmium; IEC 60269-1 and -2; Dimensions according to DIN 43 620 Parts 1 to 4
$267.91
/EA
NOT CURRENTLY IN STOCK
NH 000 2A 690V AM
Item #:
P227851
Supplier Part #: P227851
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
IEC 60269-1 and -2; Dimensions according to DIN 43 620 parts 1 to 4; 0% cadmium; VDE 0636 Part 201; Double indicator; Non-isolated gripping lugs; Lead free contact blades
$128.52
/EA
NOT CURRENTLY IN STOCK
NH 0 25A 690V AM
Item #:
P227874
Supplier Part #: P227874
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
0% cadmium; Double indicator; IEC 60269-1 and -2; Non-isolated gripping lugs; Dimensions according to DIN 43 620 parts 1 to 4; VDE 0636 Part 201; Lead free contact blades
$152.83
/EA
NOT CURRENTLY IN STOCK
NH 1 200A 690V AM
Item #:
P227897
Supplier Part #: P227897
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
IEC 60269-1 and -2; Double indicator; 0% cadmium; Lead free contact blades; VDE 0636 Part 201; Dimensions according to DIN 43 620 parts 1 to 4; Non-isolated gripping lugs
$189.24
/EA
NOT CURRENTLY IN STOCK
NH 2 63A 690V AM
Item #:
P227966
Supplier Part #: P227966
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
VDE 0636 Part 201; Dimensions according to DIN 43 620 parts 1 to 4; Non-isolated gripping lugs; Double indicator; 0% cadmium; Lead free contact blades; IEC 60269-1 and -2
$246.68
/EA
NOT CURRENTLY IN STOCK
NH 000 35A 690V GG
Item #:
P228449
Supplier Part #: P228449
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Double indicator; VDE 0636 Part 201; Dimensions according to DIN 43 620 parts 1 to 4; Non-isolated gripping lugs; 0% cadmium; IEC 60269-1 and -2; Lead free contact blades
$123.49
/EA
NOT CURRENTLY IN STOCK
NH 0 80A 690V GG
Item #:
P228472
Supplier Part #: P228472
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Dimensions according to DIN 43 620 parts 1 to 4; IEC 60269-1 and -2; Double indicator; Non-isolated gripping lugs; VDE 0636 Part 201; Lead free contact blades; 0% cadmium
$158.06
/EA
NOT CURRENTLY IN STOCK
NH 2 100A 690V GG
Item #:
P228495
Supplier Part #: P228495
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
VDE 0636 Part 201; 0% cadmium; Double indicator; IEC 60269-1 and -2; Lead free contact blades; Dimensions according to DIN 43 620 parts 1 to 4; Non-isolated gripping lugs
$242.32
/EA
NOT CURRENTLY IN STOCK
