Search in Category
Fuses
Search Filters
-
Hungary x
Filter Your Search
Brand
Diameter
Fuse Size
Shop by Category
Loading...
Fuses
Power ProductsFuses
Viewing Page 10 of 61
(602 results)
NH 2 50A 690V GG
Item #:
L228492
Supplier Part #: L228492
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
IEC 60269-1 and -2; Lead free contact blades; VDE 0636 Part 201; 0% cadmium; Dimensions according to DIN 43 620 parts 1 to 4; Non-isolated gripping lugs; Double indicator
$232.78
/EA
NOT CURRENTLY IN STOCK
NH 000 25A 690V GG SGL
Item #:
L229711
Supplier Part #: L229711
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
VDE 0636 Part 201; 0% cadmium; Dimensions according to DIN 43 620 Parts 1 to 4; Isolated metal gripping lugs (SGL); Double indicator; IEC 60269-1 and -2; Lead free contact blades
$135.70
/EA
NOT CURRENTLY IN STOCK
NH 0 50A 690V GG SGL
Item #:
L229734
Supplier Part #: L229734
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
0% cadmium; Dimensions according to DIN 43 620 Parts 1 to 4; IEC 60269-1 and -2; Lead free contact blades; Isolated metal gripping lugs (SGL); VDE 0636 Part 201; Double indicator
$172.06
/EA
NOT CURRENTLY IN STOCK
NH 2 35A 690V GG SGL
Item #:
L229757
Supplier Part #: L229757
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Double indicator; Lead free contact blades; IEC 60269-1 and -2; VDE 0636 Part 201; Dimensions according to DIN 43 620 Parts 1 to 4; Isolated metal gripping lugs (SGL); 0% cadmium
$277.09
/EA
NOT CURRENTLY IN STOCK
NH 000 4A 500V AM
Item #:
L232494
Supplier Part #: L232494
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
Dimensions according to DIN 43 620 parts 1 to 4; 0% cadmium; VDE 0636 Part 201; Lead free contact blades; IEC 60269-1 and -2; Double indicator; Non-isolated gripping lugs
$133.49
/EA
NOT CURRENTLY IN STOCK
NH 2 315A 500V AM
Item #:
L232517
Supplier Part #: L232517
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
Non-isolated gripping lugs; 0% cadmium; Dimensions according to DIN 43 620 parts 1 to 4; IEC 60269-1 and -2; Double indicator; Lead free contact blades; VDE 0636 Part 201
$288.01
/EA
NOT CURRENTLY IN STOCK
NH 1 16A 500V GG
Item #:
M200801
Supplier Part #: M200801
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Non-isolated gripping lugs; 0% cadmium; Dimensions according to DIN 43 620 parts 1 to 4; VDE 0636 Part 201; Double indicator; IEC 60269-1 and -2; Lead free contact blades
$182.93
/EA
NOT CURRENTLY IN STOCK
NH 2 40A 500V GG
Item #:
M211082
Supplier Part #: M211082
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Double indicator; Non-isolated gripping lugs; IEC 60269-1 and -2; Dimensions according to DIN 43 620 parts 1 to 4; 0% cadmium; Lead free contact blades; VDE 0636 Part 201
$232.78
/EA
NOT CURRENTLY IN STOCK
NH 000 4A 500V GG
Item #:
M212462
Supplier Part #: M212462
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
VDE 0636 Part 201; Double indicator; Dimensions according to DIN 43 620 parts 1 to 4; Lead free contact blades; 0% cadmium; IEC 60269-1 and -2; Non-isolated gripping lugs
$119.44
/EA
NOT CURRENTLY IN STOCK
NH 0 10A 500V GG SGL
Item #:
M213152
Supplier Part #: M213152
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Dimensions according to DIN 43 620 Parts 1 to 4; Double indicator; Lead free contact blades; Isolated metal gripping lugs (SGL); 0% cadmium; VDE 0636 Part 201; IEC 60269-1 and -2
$161.60
/EA
NOT CURRENTLY IN STOCK
