Search in Category
Fuses
Filter Your Search
Brand
Shop by Category
Loading...
Fuses
Power ProductsFuses
Viewing Page 1 of 7
(63 results)
NH 3 250A 690V AM
Item #:
D227979
Supplier Part #: D227979
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
Lead free contact blades; 0% cadmium; IEC 60269-1 and -2; Double indicator; Non-isolated gripping lugs; Dimensions according to DIN 43 620 parts 1 to 4; VDE 0636 Part 201
$438.74
/EA
NOT CURRENTLY IN STOCK
NH 3 400A 690V GG
Item #:
D228508
Supplier Part #: D228508
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
IEC 60269-1 and -2; Lead free contact blades; Dimensions according to DIN 43 620 parts 1 to 4; Non-isolated gripping lugs; Double indicator; VDE 0636 Part 201; 0% cadmium
$468.79
/EA
NOT CURRENTLY IN STOCK
NH 3 800A 500V GG
Item #:
D229773
Supplier Part #: D229773
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Isolated metal gripping lugs (SGL); Double indicator; IEC 60269-1 and -2; Dimensions according to DIN 43 620 Parts 1 to 4; 0% cadmium; Lead free contact blades; VDE 0636 Part 201
$515.35
/EA
NOT CURRENTLY IN STOCK
NH 3 425A 690V GG
Item #:
E228509
Supplier Part #: E228509
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Dimensions according to DIN 43 620 parts 1 to 4; Double indicator; Non-isolated gripping lugs; 0% cadmium; IEC 60269-1 and -2; Lead free contact blades; VDE 0636 Part 201
$468.79
/EA
NOT CURRENTLY IN STOCK
NH 3 450A 500V GG SGL
Item #:
F216205
Supplier Part #: F216205
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
VDE 0636 Part 201; Lead free contact blades; Double indicator; Isolated metal gripping lugs (SGL); 0% cadmium; IEC 60269-1 and -2; Dimensions according to DIN 43 620 Parts 1 to 4
$436.58
/EA
NOT CURRENTLY IN STOCK
NH 3 315A 690V AM
Item #:
F227981
Supplier Part #: F227981
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
IEC 60269-1 and -2; Non-isolated gripping lugs; Dimensions according to DIN 43 620 parts 1 to 4; Double indicator; 0% cadmium; Lead free contact blades; VDE 0636 Part 201
$456.02
/EA
NOT CURRENTLY IN STOCK
NH 3 500A 690V GG
Item #:
F228510
Supplier Part #: F228510
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Lead free contact blades; Non-isolated gripping lugs; Double indicator; IEC 60269-1 and -2; 0% cadmium; Dimensions according to DIN 43 620 parts 1 to 4; VDE 0636 Part 201
$473.04
/EA
NOT CURRENTLY IN STOCK
NH 3 355A 690V GG SGL
Item #:
F229775
Supplier Part #: F229775
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Isolated metal gripping lugs (SGL); Lead free contact blades; VDE 0636 Part 201; IEC 60269-1 and -2; 0% cadmium; Double indicator; Dimensions according to DIN 43 620 Parts 1 to 4
$515.35
/EA
NOT CURRENTLY IN STOCK
NH 3 300A 500V GG SGL
Item #:
G211606
Supplier Part #: G211606
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Lead free contact blades; Dimensions according to DIN 43 620 Parts 1 to 4; VDE 0636 Part 201; Isolated metal gripping lugs (SGL); Double indicator; IEC 60269-1 and -2; 0% cadmium
$436.58
/EA
NOT CURRENTLY IN STOCK
NH 3 355A 690V AM
Item #:
G227982
Supplier Part #: G227982
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
Lead free contact blades; Dimensions according to DIN 43 620 parts 1 to 4; IEC 60269-1 and -2; Non-isolated gripping lugs; Double indicator; 0% cadmium; VDE 0636 Part 201
$456.02
/EA
NOT CURRENTLY IN STOCK
