Search in Category
Fuses
Filter Your Search
Brand
Shop by Category
Loading...
Fuses
Power ProductsFuses
Viewing Page 1 of 12
(114 results)
NH 1 224A 400V GG SGL
Item #:
D223724
Supplier Part #: D223724
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.
Dimensions according to DIN 43 620 Parts 1 to 4; Lead free contact blades; VDE 0636 Part 201; 0% cadmium; IEC 60269-1 and -2; Isolated metal gripping lugs (SGL); Double indicator
$229.14
/EA
NOT CURRENTLY IN STOCK
NH 1 25A 690V AM
Item #:
D227887
Supplier Part #: D227887
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
Lead free contact blades; Dimensions according to DIN 43 620 parts 1 to 4; 0% cadmium; VDE 0636 Part 201; Double indicator; IEC 60269-1 and -2; Non-isolated gripping lugs
$181.60
/EA
NOT CURRENTLY IN STOCK
NH 1 100A 690V GG
Item #:
D228485
Supplier Part #: D228485
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
IEC 60269-1 and -2; Dimensions according to DIN 43 620 parts 1 to 4; Double indicator; 0% cadmium; Lead free contact blades; VDE 0636 Part 201; Non-isolated gripping lugs
$190.16
/EA
NOT CURRENTLY IN STOCK
NH 1 125A 690V GG SGL
Item #:
D229750
Supplier Part #: D229750
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
VDE 0636 Part 201; Double indicator; 0% cadmium; Lead free contact blades; IEC 60269-1 and -2; Dimensions according to DIN 43 620 Parts 1 to 4; Isolated metal gripping lugs (SGL)
$209.29
/EA
NOT CURRENTLY IN STOCK
NH 1 100A 500V AM
Item #:
D232510
Supplier Part #: D232510
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
Double indicator; VDE 0636 Part 201; Non-isolated gripping lugs; Dimensions according to DIN 43 620 parts 1 to 4; Lead free contact blades; 0% cadmium; IEC 60269-1 and -2
$196.37
/EA
NOT CURRENTLY IN STOCK
NH 1 250A 500V GG SGL
Item #:
E218251
Supplier Part #: E218251
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Lead free contact blades; VDE 0636 Part 201; Double indicator; Dimensions according to DIN 43 620 Parts 1 to 4; Isolated metal gripping lugs (SGL); IEC 60269-1 and -2; 0% cadmium
$224.27
/EA
NOT CURRENTLY IN STOCK
NH 1 250A 500V GG
Item #:
E219815
Supplier Part #: E219815
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
0% cadmium; IEC 60269-1 and -2; VDE 0636 Part 201; Non-isolated gripping lugs; Dimensions according to DIN 43 620 parts 1 to 4; Double indicator; Lead free contact blades
$190.16
/EA
NOT CURRENTLY IN STOCK
NH 1 125A 690V GG
Item #:
E228486
Supplier Part #: E228486
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Double indicator; Dimensions according to DIN 43 620 parts 1 to 4; IEC 60269-1 and -2; Non-isolated gripping lugs; VDE 0636 Part 201; Lead free contact blades; 0% cadmium
$188.72
/EA
NOT CURRENTLY IN STOCK
NH 1 125A 500V AM
Item #:
E232511
Supplier Part #: E232511
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
Non-isolated gripping lugs; Lead free contact blades; IEC 60269-1 and -2; VDE 0636 Part 201; Double indicator; 0% cadmium; Dimensions according to DIN 43 620 parts 1 to 4
$196.37
/EA
NOT CURRENTLY IN STOCK
NH 1 35A 690V AM
Item #:
F227889
Supplier Part #: F227889
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
Lead free contact blades; Double indicator; Non-isolated gripping lugs; 0% cadmium; IEC 60269-1 and -2; VDE 0636 Part 201; Dimensions according to DIN 43 620 parts 1 to 4
$188.72
/EA
NOT CURRENTLY IN STOCK
