Search in Category
Fuses
Search Filters
-
NH2 x
Filter Your Search
Brand
Country Of Origin
Voltage
Shop by Category
Loading...
Fuses
Power ProductsFuses
Viewing Page 1 of 16
(151 results)
NH 2C 160A 400V GG SGL
Item #:
A223744
Supplier Part #: A223744
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.
Isolated metal gripping lugs (SGL); Dimensions according to DIN 43 620 Parts 1 to 4; 0% cadmium; IEC 60269-1 and -2; VDE 0636 Part 201; Lead free contact blades; Double indicator
$282.83
/EA
NOT CURRENTLY IN STOCK
NH 2 400A 500V GG SGL
Item #:
B211601
Supplier Part #: B211601
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
IEC 60269-1 and -2; Dimensions according to DIN 43 620 parts 1 to 4; Double indicator; 0% cadmium; Lead free contact blades; VDE 0636 Part 201; Non-isolated gripping lugs
$232.78
/EA
NOT CURRENTLY IN STOCK
BASE NH 2-PP F/TORN. 3P
Item #:
B212107
Supplier Part #: B212107
Brand:
Mersen
NH fuse-bases are available for delivery in single-pole and three-pole designs and can be closely mounted in parallel rows. Each three-pole base is upplied with two phase-partition walls. NH fuse-links plugon covers which clip onto the contact springs can also be supplied for these bases. Plastic fuse-bases sizes 00 to 3 have a single-part plastic base while size 4 has a metal baseplate with 2 ceramic bases. The stable silver-plated contact springs are made of electrolytic copper and formed from one piece. Separate springing is provided by highly resilient captive steel springs, making the contact invulnerable to high thermal stress. Size 4 NH fuse-bases are designed for size 4 fuse-links with 8 mm contact blades. A microswitch (250VAC/10A, terminal size 6.3x0.8mm) can be used with NH fuse-links with striker, it operates when fuse melts or where there is no fuse-link. Indirect touch protection fuse bases no microswitch possible. Rated impulse withstand voltage Uimp 6kV / 8kV (sizes 00 / 0-4)
Polyamide insulating bases; Dimensions in accordance with DIN 43620; High-pressure spring contacts; DIN VDE 0636-2, 0636-21; Multipolar bases possible by direct linkage in 00 size and with separator accessory in sizes 0, 1, 2 and 3; Screw or rail mounting; Silver-plated contacts; IEC 60269 Compliance
$841.93
/EA
NOT CURRENTLY IN STOCK
BASE NH 2-PP F/TORN. 4P
Item #:
C213143
Supplier Part #: C213143
Brand:
Mersen
NH fuse-bases are available for delivery in single-pole and three-pole designs and can be closely mounted in parallel rows. Each three-pole base is upplied with two phase-partition walls. NH fuse-links plugon covers which clip onto the contact springs can also be supplied for these bases. Plastic fuse-bases sizes 00 to 3 have a single-part plastic base while size 4 has a metal baseplate with 2 ceramic bases. The stable silver-plated contact springs are made of electrolytic copper and formed from one piece. Separate springing is provided by highly resilient captive steel springs, making the contact invulnerable to high thermal stress. Size 4 NH fuse-bases are designed for size 4 fuse-links with 8 mm contact blades. A microswitch (250VAC/10A, terminal size 6.3x0.8mm) can be used with NH fuse-links with striker, it operates when fuse melts or where there is no fuse-link. Indirect touch protection fuse bases no microswitch possible. Rated impulse withstand voltage Uimp 6kV / 8kV (sizes 00 / 0-4)
Polyamide insulating bases; Dimensions in accordance with DIN 43620; Screw or rail mounting; High-pressure spring contacts; DIN VDE 0636-2, 0636-21; IEC 60269 Compliance; Multipolar bases possible by direct linkage in 00 size and with separator accessory in sizes 0, 1, 2 and 3; Silver-plated contacts
$1,159.28
/EA
NOT CURRENTLY IN STOCK
NH 2 200A 400V GG SGL
Item #:
C223746
Supplier Part #: C223746
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.
VDE 0636 Part 201; Isolated metal gripping lugs (SGL); 0% cadmium; Dimensions according to DIN 43 620 Parts 1 to 4; Lead free contact blades; IEC 60269-1 and -2; Double indicator
$282.83
/EA
NOT CURRENTLY IN STOCK
6,9 GS 2 PV 0450
Item #:
C322485
Supplier Part #: C322485
Brand:
Mersen
The 690/700V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for today's power conversion equipment. These NH style fuse-links are defined as per DIN 43620/00 for a worldwide acceptance into NH modular system fuse-holders, fuse switch disconnectors for direct installation. The Protistor® have been engineered to provide state-of-the-art protection for semiconductors diodes, thyristors, GTO's and IGBT devices. Fuses are assembled with pure silver, die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
Fast acting; Highly current limiting; IEC 60269-4 Compliance; gS Class according to IEC 60269-4; CCC GB 1359.4; Low I²t for improved semiconductor protection; Excellent cycling capability; Multiple body sizes; High widstanding against inrush current and overloads; UL/CSA Recognized Component; Reduced power dissipation; No derating in standard NH fusegear
$1,425.00
/EA
NOT CURRENTLY IN STOCK
500V NH2 C/P gG 355A
Item #:
E215675
Supplier Part #: E215675
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Dimensions according to DIN 43 620 Parts 1 to 4; IEC 60269-1 and -2; VDE 0636 Part 201; Lead free contact blades; 0% cadmium
$316.12
/EA
NOT CURRENTLY IN STOCK
NH 2 160A 500V GG
Item #:
E216204
Supplier Part #: E216204
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
VDE 0636 Part 201; Dimensions according to DIN 43 620 Parts 1 to 4; 0% cadmium; Lead free contact blades; IEC 60269-1 and -2; Isolated metal gripping lugs (SGL); Double indicator
$268.32
/EA
NOT CURRENTLY IN STOCK
NH 2 125A 400V GG
Item #:
H223728
Supplier Part #: H223728
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.
Non-isolated gripping lugs; Double indicator; Lead free contact blades; IEC 60269-1 and -2; VDE 0636 Part 201; 0% cadmium; Dimensions according to DIN 43 620 Parts 1 to 4
$268.32
/EA
NOT CURRENTLY IN STOCK
NH 2 32A 690V GG
Item #:
H228489
Supplier Part #: H228489
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Dimensions according to DIN 43 620 parts 1 to 4; VDE 0636 Part 201; Double indicator; Lead free contact blades; Non-isolated gripping lugs; 0% cadmium; IEC 60269-1 and -2
$242.32
/EA
NOT CURRENTLY IN STOCK
