Search in Category
Fuses
Filter Your Search
Brand
Shop by Category
Loading...
Fuses
Power ProductsFuses
Viewing Page 1 of 13
(121 results)
NH 2 300A 500V GG SGL
Item #:
D201345
Supplier Part #: D201345
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
VDE 0636 Part 201; Double indicator; IEC 60269-1 and -2; Lead free contact blades; Non-isolated gripping lugs; 0% cadmium; Dimensions according to DIN 43 620 parts 1 to 4
$232.78
/EA
NOT CURRENTLY IN STOCK
NH 2 355A 690V AM
Item #:
A227976
Supplier Part #: A227976
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
Double indicator; Non-isolated gripping lugs; IEC 60269-1 and -2; Dimensions according to DIN 43 620 parts 1 to 4; VDE 0636 Part 201; Lead free contact blades; 0% cadmium
$249.19
/EA
NOT CURRENTLY IN STOCK
NH 2C 160A 400V GG SGL
Item #:
A223744
Supplier Part #: A223744
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.
Isolated metal gripping lugs (SGL); Dimensions according to DIN 43 620 Parts 1 to 4; 0% cadmium; IEC 60269-1 and -2; VDE 0636 Part 201; Lead free contact blades; Double indicator
$282.83
/EA
NOT CURRENTLY IN STOCK
FUS. AM NH2 C/P 160A
Item #:
B201849
Supplier Part #: B201849
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current, it must be handled by a qualified professional.
IEC 60269-1 and -2; VDE 0636 Part 201; 0% cadmium; Lead free contact blades; Dimensions according to DIN 43 620 Parts 1 to 4
$326.63
/EA
NOT CURRENTLY IN STOCK
NH 2 400A 500V GG SGL
Item #:
B211601
Supplier Part #: B211601
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
IEC 60269-1 and -2; Dimensions according to DIN 43 620 parts 1 to 4; Double indicator; 0% cadmium; Lead free contact blades; VDE 0636 Part 201; Non-isolated gripping lugs
$232.78
/EA
NOT CURRENTLY IN STOCK
NH 2 160A 400V GG SGL
Item #:
B223745
Supplier Part #: B223745
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.
Lead free contact blades; Dimensions according to DIN 43 620 Parts 1 to 4; Double indicator; VDE 0636 Part 201; IEC 60269-1 and -2; Isolated metal gripping lugs (SGL); 0% cadmium
$282.83
/EA
NOT CURRENTLY IN STOCK
NH 2 400A 690V AM
Item #:
B227977
Supplier Part #: B227977
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
IEC 60269-1 and -2; Dimensions according to DIN 43 620 parts 1 to 4; Non-isolated gripping lugs; VDE 0636 Part 201; Lead free contact blades; Double indicator; 0% cadmium
$276.88
/EA
NOT CURRENTLY IN STOCK
NH 2 63A 500V GG
Item #:
C213649
Supplier Part #: C213649
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Dimensions according to DIN 43 620 parts 1 to 4; IEC 60269-1 and -2; VDE 0636 Part 201; Double indicator; Non-isolated gripping lugs; 0% cadmium; Lead free contact blades
$232.78
/EA
NOT CURRENTLY IN STOCK
NH 2 200A 400V GG SGL
Item #:
C223746
Supplier Part #: C223746
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.
VDE 0636 Part 201; Isolated metal gripping lugs (SGL); 0% cadmium; Dimensions according to DIN 43 620 Parts 1 to 4; Lead free contact blades; IEC 60269-1 and -2; Double indicator
$282.83
/EA
NOT CURRENTLY IN STOCK
NH 2 224A 400V GG SGL
Item #:
D223747
Supplier Part #: D223747
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.
VDE 0636 Part 201; Dimensions according to DIN 43 620 Parts 1 to 4; Double indicator; 0% cadmium; Lead free contact blades; Isolated metal gripping lugs (SGL); IEC 60269-1 and -2
$282.83
/EA
NOT CURRENTLY IN STOCK
