Search in Category
Fuses
Search Filters
-
NH00 x
Filter Your Search
Brand
Country Of Origin
Voltage
Shop by Category
Loading...
Fuses
Power ProductsFuses
Viewing Page 4 of 10
(96 results)
NH 00 50A 690V AM
Item #:
D227864
Supplier Part #: D227864
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
VDE 0636 Part 201; Double indicator; Non-isolated gripping lugs; 0% cadmium; Dimensions according to DIN 43 620 parts 1 to 4; IEC 60269-1 and -2; Lead free contact blades
$123.54
/EA
NOT CURRENTLY IN STOCK
NH 00 125A 400V GG
Item #:
E223702
Supplier Part #: E223702
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.
0% cadmium; Non-isolated gripping lugs; Double indicator; Lead free contact blades; IEC 60269-1 and -2; VDE 0636 Part 201; Dimensions according to DIN 43 620 Parts 1 to 4
$130.06
/EA
NOT CURRENTLY IN STOCK
NH 00 63A 690V AM
Item #:
E227865
Supplier Part #: E227865
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
0% cadmium; Lead free contact blades; IEC 60269-1 and -2; Double indicator; Non-isolated gripping lugs; VDE 0636 Part 201; Dimensions according to DIN 43 620 parts 1 to 4
$123.54
/EA
NOT CURRENTLY IN STOCK
NH 00 160A 400V GG SGL
Item #:
H223705
Supplier Part #: H223705
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.
Double indicator; VDE 0636 Part 201; 0% cadmium; Isolated metal gripping lugs (SGL); Dimensions according to DIN 43 620 Parts 1 to 4; Lead free contact blades; IEC 60269-1 and -2
$130.06
/EA
NOT CURRENTLY IN STOCK
6,9 URB 00 D08L 200
Item #:
H330241
Supplier Part #: H330241
Brand:
Mersen
The 690/700V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for small power conversion equipment. These ultra-fast acting aR fuses have been engineered to provide state-of-the-art protection for semiconductors diodes, thyristors and IGBT devices. They are assembled with die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
Superior cycling capability; AC: UL Guide No. E76491; aR Class according to IEC 60269-4 and VDE 636-23; Ultra fast acting; UL/CSA Recognized Component; Very low I²t for improved semiconductor protection; IEC 60269-4 Compliance
$295.61
/EA
NOT CURRENTLY IN STOCK
6,9 URB 00 D11L 350
Item #:
H330264
Supplier Part #: H330264
Brand:
Mersen
The 690/700V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for small power conversion equipment. These ultra-fast acting aR fuses have been engineered to provide state-of-the-art protection for semiconductors diodes, thyristors and IGBT devices. They are assembled with die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
IEC 60269-4 Compliance; AC: UL Guide No. E76491; Ultra fast acting; Superior cycling capability; UL/CSA Recognized Component; aR Class according to IEC 60269-4 and VDE 636-23; Very low I²t for improved semiconductor protection
$361.53
/EA
NOT CURRENTLY IN STOCK
NH 00 125A 400V GG SGL
Item #:
G223704
Supplier Part #: G223704
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.
Lead free contact blades; VDE 0636 Part 201; Isolated metal gripping lugs (SGL); Double indicator; IEC 60269-1 and -2; Dimensions according to DIN 43 620 Parts 1 to 4; 0% cadmium
$130.06
/EA
NOT CURRENTLY IN STOCK
NH 00 100A 690V AM
Item #:
G227867
Supplier Part #: G227867
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
Non-isolated gripping lugs; IEC 60269-1 and -2; 0% cadmium; Double indicator; Lead free contact blades; Dimensions according to DIN 43 620 parts 1 to 4; VDE 0636 Part 201
$128.52
/EA
NOT CURRENTLY IN STOCK
1000 C4 URD 63 L D80
Item #:
J076414
Supplier Part #: J076414
Brand:
Mersen
The 1000V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for small power conversion equipment. These ultra-fast acting aR fuses have been engineered to provide state-of-the-art protection for semiconductors diodes, thyristors and IGBT devices. They are assembled with die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
Superior cycling capability; Compact Size; Very low I²t for improved semiconductor protection; Ultra fast acting; EN 60269-4 compliant
$1,221.49
/EA
NOT CURRENTLY IN STOCK
6,9 GS 00 PV 160
Item #:
J322169
Supplier Part #: J322169
Brand:
Mersen
The 690/700V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for today's power conversion equipment. These NH style fuse-links are defined as per DIN 43620/00 for a worldwide acceptance into NH modular system fuse-holders, fuse switch disconnectors for direct installation. The Protistor® have been engineered to provide state-of-the-art protection for semiconductors diodes, thyristors, GTO's and IGBT devices. Fuses are assembled with pure silver, die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
CCC GB 1359.4; High widstanding against inrush current and overloads; Low I²t for improved semiconductor protection; Excellent cycling capability; Highly current limiting; gS Class according to IEC 60269-4; Fast acting; UL/CSA Recognized Component; No derating in standard NH fusegear; IEC 60269-4 Compliance; Reduced power dissipation; Multiple body sizes
$258.35
/EA
NOT CURRENTLY IN STOCK
