Browse Categories

Search in Category

Fuses

Search Filters

  • 2.88 in x

Filter Your Search

Shop by Category

Fuses

Power Products/Fuses 
Viewing Page 4 of 6 (53 results)
Sort By:
View:
7.2KV,442mm,3DIA,MV FUSE 6R

7.2KV,442mm,3DIA,MV FUSE 6R

Item #: A072D1DSR0-6R

Supplier Part #: A072D1DSR0-6R
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/9699fe29c06b91e32f69e508aaccd5f7b8152f17.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/9699fe29c06b91e32f69e508aaccd5f7b8152f17.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c54eb8db0cac8ea9f2c3c08b51db99ae2ddeae99.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c54eb8db0cac8ea9f2c3c08b51db99ae2ddeae99.pdf

Amp-Trap® R-Rated DIN style fuses are current-limiting, high interrupting rating fuses, intended for the short circuit protection of medium voltage motors and motor controllers. This product range offers North American R-Rated performance in the IEC 282-1 DIN mounting configuration of 442mm. R-Rated fuses are applied as back up fuses that have a minimum interrupting rating, and must be coordinated with overload relays in combination motor starters. Amp-Trap R-Rated, DIN type fuses are offered in voltage ratings of 3.3kV, 5.3kV and 7.2kV in ratings from 2R to 19R. All fuses within this product group are UL component recognized. DEFINITIONS ,R-Rating R-Rated fuses are back-up fuses that operate as follows (Per ANSI C37.46-2000) An R-Rated fuse will melt in the range of 15 to 35 seconds at a value of current equal to 100 times the “R” rating ,Back-up Current-Limiting Fuses A back-up current-limiting fuse is a fuse that can interrupt any current between its rated minimum interrupting current and its maximum interrupting current. Back-up fuses are not designed or intended to open under overload conditions ,Continuous Ampere Rating at 40°C The continuous amp rating defines the thermal capability of the fuse per ANSI C37.46 and should not be the sole factor in fuse selection ,Spring-Reinforced Clip MR45 & Spring Ref.# L096472 ,Fuse-Holder SI 24/442 Ref # K209424 In compliance with IEC 282-1, DIN standard 43625 ,Note Ratings above 19R may be achieved by paralleling fuses. Please consult factory for details

UL recognized component File E93367; Current-limiting for superior equipment protection; Blown fuse indicator provides positive identification of open fuse. 4.5lb tripping force – 1.0”

$1,510.35 /EA
NOT CURRENTLY IN STOCK
7.2KV,442mm,3DIA,MV FUSE 9R

7.2KV,442mm,3DIA,MV FUSE 9R

Item #: A072D1DSR0-9R

Supplier Part #: A072D1DSR0-9R
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/9699fe29c06b91e32f69e508aaccd5f7b8152f17.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/9699fe29c06b91e32f69e508aaccd5f7b8152f17.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c54eb8db0cac8ea9f2c3c08b51db99ae2ddeae99.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c54eb8db0cac8ea9f2c3c08b51db99ae2ddeae99.pdf

Amp-Trap® R-Rated DIN style fuses are current-limiting, high interrupting rating fuses, intended for the short circuit protection of medium voltage motors and motor controllers. This product range offers North American R-Rated performance in the IEC 282-1 DIN mounting configuration of 442mm. R-Rated fuses are applied as back up fuses that have a minimum interrupting rating, and must be coordinated with overload relays in combination motor starters. Amp-Trap R-Rated, DIN type fuses are offered in voltage ratings of 3.3kV, 5.3kV and 7.2kV in ratings from 2R to 19R. All fuses within this product group are UL component recognized. DEFINITIONS ,R-Rating R-Rated fuses are back-up fuses that operate as follows (Per ANSI C37.46-2000) An R-Rated fuse will melt in the range of 15 to 35 seconds at a value of current equal to 100 times the “R” rating ,Back-up Current-Limiting Fuses A back-up current-limiting fuse is a fuse that can interrupt any current between its rated minimum interrupting current and its maximum interrupting current. Back-up fuses are not designed or intended to open under overload conditions ,Continuous Ampere Rating at 40°C The continuous amp rating defines the thermal capability of the fuse per ANSI C37.46 and should not be the sole factor in fuse selection ,Spring-Reinforced Clip MR45 & Spring Ref.# L096472 ,Fuse-Holder SI 24/442 Ref # K209424 In compliance with IEC 282-1, DIN standard 43625 ,Note Ratings above 19R may be achieved by paralleling fuses. Please consult factory for details

UL recognized component File E93367; Blown fuse indicator provides positive identification of open fuse. 4.5lb tripping force – 1.0”; Current-limiting for superior equipment protection

$1,510.35 /EA
NOT CURRENTLY IN STOCK
1000V 650A SEMICOND FUSE

1000V 650A SEMICOND FUSE

Item #: A100P650-4

Supplier Part #: A100P650-4
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/72128bf5c26004cc86acfec6e4b1df18e3e980e1.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/72128bf5c26004cc86acfec6e4b1df18e3e980e1.pdf

A100P Amp-Trap® Form 101 high speed fuses are rated 1000V, extending the range of protection for UPS systems, AC and DC drives, reduced voltage motor starters and similar applications where lower I2t and superior reliability are needed. With ratings from 15 through 1000 amperes, a wide range of high voltage applications can be served.

Controlled arc voltage reduces stress to circuit components during fuse clearing; UL recognized component File E60314; AC: UL guide no. JFHR2 (35-600A); Low I2t minimizes damage to protected components on short circuit; DC: self-certified; Wide range of ampere ratings

$877.57 /EA
NOT CURRENTLY IN STOCK
94883-FUSE,FORM 101

94883-FUSE,FORM 101

Item #: A100P650-4TA

Supplier Part #: A100P650-4TA
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/72128bf5c26004cc86acfec6e4b1df18e3e980e1.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/72128bf5c26004cc86acfec6e4b1df18e3e980e1.pdf

A100P Amp-Trap® Form 101 high speed fuses are rated 1000V, extending the range of protection for UPS systems, AC and DC drives, reduced voltage motor starters and similar applications where lower I2t and superior reliability are needed. With ratings from 15 through 1000 amperes, a wide range of high voltage applications can be served.

Wide range of ampere ratings; DC: self-certified; Low I2t minimizes damage to protected components on short circuit; UL recognized component File E60314; Controlled arc voltage reduces stress to circuit components during fuse clearing; AC: UL guide no. JFHR2 (35-600A)

$1,029.80 /EA
NOT CURRENTLY IN STOCK
1000V 650A SEMICOND FUSE W/IND

1000V 650A SEMICOND FUSE W/IND

Item #: A100P650-4TI

Supplier Part #: A100P650-4TI
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/72128bf5c26004cc86acfec6e4b1df18e3e980e1.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/72128bf5c26004cc86acfec6e4b1df18e3e980e1.pdf

A100P Amp-Trap® Form 101 high speed fuses are rated 1000V, extending the range of protection for UPS systems, AC and DC drives, reduced voltage motor starters and similar applications where lower I2t and superior reliability are needed. With ratings from 15 through 1000 amperes, a wide range of high voltage applications can be served.

DC: self-certified; Low I2t minimizes damage to protected components on short circuit; AC: UL guide no. JFHR2 (35-600A); UL recognized component File E60314; Wide range of ampere ratings; Controlled arc voltage reduces stress to circuit components during fuse clearing

$944.58 /EA
NOT CURRENTLY IN STOCK
SC FUSE 1000V 700A P BLADE

SC FUSE 1000V 700A P BLADE

Item #: A100P700-4

Supplier Part #: A100P700-4
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/72128bf5c26004cc86acfec6e4b1df18e3e980e1.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/72128bf5c26004cc86acfec6e4b1df18e3e980e1.pdf

A100P Amp-Trap® Form 101 high speed fuses are rated 1000V, extending the range of protection for UPS systems, AC and DC drives, reduced voltage motor starters and similar applications where lower I2t and superior reliability are needed. With ratings from 15 through 1000 amperes, a wide range of high voltage applications can be served.

Low I2t minimizes damage to protected components on short circuit; AC: UL guide no. JFHR2 (35-600A); Controlled arc voltage reduces stress to circuit components during fuse clearing; Wide range of ampere ratings; DC: self-certified; UL recognized component File E60314

$899.33 /EA
NOT CURRENTLY IN STOCK
SC FUSE 1000V 700A P BLADE TA

SC FUSE 1000V 700A P BLADE TA

Item #: A100P700-4TA

Supplier Part #: A100P700-4TA
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/72128bf5c26004cc86acfec6e4b1df18e3e980e1.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/72128bf5c26004cc86acfec6e4b1df18e3e980e1.pdf

A100P Amp-Trap® Form 101 high speed fuses are rated 1000V, extending the range of protection for UPS systems, AC and DC drives, reduced voltage motor starters and similar applications where lower I2t and superior reliability are needed. With ratings from 15 through 1000 amperes, a wide range of high voltage applications can be served.

Low I2t minimizes damage to protected components on short circuit; AC: UL guide no. JFHR2 (35-600A); Wide range of ampere ratings; Controlled arc voltage reduces stress to circuit components during fuse clearing; DC: self-certified; UL recognized component File E60314

$1,029.80 /EA
NOT CURRENTLY IN STOCK
1000V 700A SEMICOND FUSE W/IND

1000V 700A SEMICOND FUSE W/IND

Item #: A100P700-4TI

Supplier Part #: A100P700-4TI
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/72128bf5c26004cc86acfec6e4b1df18e3e980e1.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/72128bf5c26004cc86acfec6e4b1df18e3e980e1.pdf

A100P Amp-Trap® Form 101 high speed fuses are rated 1000V, extending the range of protection for UPS systems, AC and DC drives, reduced voltage motor starters and similar applications where lower I2t and superior reliability are needed. With ratings from 15 through 1000 amperes, a wide range of high voltage applications can be served.

Wide range of ampere ratings; Low I2t minimizes damage to protected components on short circuit; DC: self-certified; Controlled arc voltage reduces stress to circuit components during fuse clearing; AC: UL guide no. JFHR2 (35-600A); UL recognized component File E60314

$966.33 /EA
NOT CURRENTLY IN STOCK
1000V 800A SEMICOND FUSE

1000V 800A SEMICOND FUSE

Item #: A100P800-4

Supplier Part #: A100P800-4
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/72128bf5c26004cc86acfec6e4b1df18e3e980e1.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/72128bf5c26004cc86acfec6e4b1df18e3e980e1.pdf

A100P Amp-Trap® Form 101 high speed fuses are rated 1000V, extending the range of protection for UPS systems, AC and DC drives, reduced voltage motor starters and similar applications where lower I2t and superior reliability are needed. With ratings from 15 through 1000 amperes, a wide range of high voltage applications can be served.

AC: UL guide no. JFHR2 (35-600A); UL recognized component File E60314; DC: self-certified; Controlled arc voltage reduces stress to circuit components during fuse clearing; Low I2t minimizes damage to protected components on short circuit; Wide range of ampere ratings

$914.03 /EA
NOT CURRENTLY IN STOCK
94073-FUSE,FORM 101

94073-FUSE,FORM 101

Item #: A100P800-4TA

Supplier Part #: A100P800-4TA
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/72128bf5c26004cc86acfec6e4b1df18e3e980e1.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/72128bf5c26004cc86acfec6e4b1df18e3e980e1.pdf

A100P Amp-Trap® Form 101 high speed fuses are rated 1000V, extending the range of protection for UPS systems, AC and DC drives, reduced voltage motor starters and similar applications where lower I2t and superior reliability are needed. With ratings from 15 through 1000 amperes, a wide range of high voltage applications can be served.

DC: self-certified; Controlled arc voltage reduces stress to circuit components during fuse clearing; AC: UL guide no. JFHR2 (35-600A); Wide range of ampere ratings; Low I2t minimizes damage to protected components on short circuit; UL recognized component File E60314

$1,029.80 /EA
NOT CURRENTLY IN STOCK
  • « PREV
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • NEXT »