Search in Category
Fuses
Search Filters
-
NH1 x
Filter Your Search
Brand
Country Of Origin
Voltage
Shop by Category
Loading...
Fuses
Power ProductsFuses
Viewing Page 3 of 14
(135 results)
NH 1 250A 500V GG
Item #:
E219815
Supplier Part #: E219815
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
0% cadmium; IEC 60269-1 and -2; VDE 0636 Part 201; Non-isolated gripping lugs; Dimensions according to DIN 43 620 parts 1 to 4; Double indicator; Lead free contact blades
$190.16
/EA
NOT CURRENTLY IN STOCK
NH 1 250A 400V GG SGL
Item #:
E223725
Supplier Part #: E223725
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.
IEC 60269-1 and -2; Dimensions according to DIN 43 620 Parts 1 to 4; Double indicator; VDE 0636 Part 201; Lead free contact blades; Isolated metal gripping lugs (SGL); 0% cadmium
$229.14
/EA
NOT CURRENTLY IN STOCK
NH 1 32A 690V AM
Item #:
E227888
Supplier Part #: E227888
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
VDE 0636 Part 201; Dimensions according to DIN 43 620 parts 1 to 4; Double indicator; Lead free contact blades; 0% cadmium; Non-isolated gripping lugs; IEC 60269-1 and -2
$188.72
/EA
NOT CURRENTLY IN STOCK
NH 1 125A 690V GG
Item #:
E228486
Supplier Part #: E228486
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Double indicator; Dimensions according to DIN 43 620 parts 1 to 4; IEC 60269-1 and -2; Non-isolated gripping lugs; VDE 0636 Part 201; Lead free contact blades; 0% cadmium
$188.72
/EA
NOT CURRENTLY IN STOCK
NH 1 160A 690V GG SGL
Item #:
E229751
Supplier Part #: E229751
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
IEC 60269-1 and -2; Isolated metal gripping lugs (SGL); Dimensions according to DIN 43 620 Parts 1 to 4; Double indicator; Lead free contact blades; VDE 0636 Part 201; 0% cadmium
$207.70
/EA
NOT CURRENTLY IN STOCK
NH 1 125A 500V AM
Item #:
E232511
Supplier Part #: E232511
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
Non-isolated gripping lugs; Lead free contact blades; IEC 60269-1 and -2; VDE 0636 Part 201; Double indicator; 0% cadmium; Dimensions according to DIN 43 620 parts 1 to 4
$196.37
/EA
NOT CURRENTLY IN STOCK
6,9 URD 1 PV 0200
Item #:
E320371
Supplier Part #: E320371
Brand:
Mersen
The 690/700V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for today's power conversion equipment. These NH style fuse-links are defined as per DIN 43620/00 for a worldwide acceptance into NH modular system fuse-holders, fuse switch disconnectors for direct installation. The Protistor® have been engineered to provide state-of-the-art protection for semiconductors diodes, thyristors, GTO's and IGBT devices. Fuses are assembled with pure silver, die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
Indication system with double indicator; Ultra fast acting; aR Class according to VDE 636-23 and IEC 60269-4; UL/CSA Recognized Component; Superior cycling capability; IEC 60269-4 Compliance; Very low I²t for improved semiconductor protection; Multiple body sizes; Current limiting
$873.67
/EA
NOT CURRENTLY IN STOCK
NH 1 50A 500V GG
Item #:
B213648
Supplier Part #: B213648
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Dimensions according to DIN 43 620 parts 1 to 4; Double indicator; Non-isolated gripping lugs; 0% cadmium; Lead free contact blades; IEC 60269-1 and -2; VDE 0636 Part 201
$182.93
/EA
NOT CURRENTLY IN STOCK
NH 1 160A 500V GG SGL
Item #:
B216707
Supplier Part #: B216707
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
VDE 0636 Part 201; Dimensions according to DIN 43 620 Parts 1 to 4; Double indicator; 0% cadmium; IEC 60269-1 and -2; Isolated metal gripping lugs (SGL); Lead free contact blades
$199.19
/EA
NOT CURRENTLY IN STOCK
FUS. AM NH1 C/P 200A
Item #:
B222480
Supplier Part #: B222480
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current, it must be handled by a qualified professional.
IEC 60269-1 and -2; Dimensions according to DIN 43 620 Parts 1 to 4; Lead free contact blades; 0% cadmium; VDE 0636 Part 201
$285.65
/EA
NOT CURRENTLY IN STOCK
