Search in Category
Fuses
Search Filters
-
NH1 x
Filter Your Search
Brand
Country Of Origin
Voltage
Shop by Category
Loading...
Fuses
Power ProductsFuses
Viewing Page 10 of 14
(135 results)
690V NH1 C/P gG 100A
Item #:
M219270
Supplier Part #: M219270
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Dimensions according to DIN 43 620 Parts 1 to 4; VDE 0636 Part 201; Lead free contact blades; 0% cadmium; IEC 60269-1 and -2
$267.91
/EA
NOT CURRENTLY IN STOCK
NH 1 80A 400V GG
Item #:
M223709
Supplier Part #: M223709
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.
Non-isolated gripping lugs; Lead free contact blades; Double indicator; 0% cadmium; Dimensions according to DIN 43 620 Parts 1 to 4; VDE 0636 Part 201; IEC 60269-1 and -2
$199.19
/EA
NOT CURRENTLY IN STOCK
NH 1 125A 690V AM
Item #:
M227895
Supplier Part #: M227895
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
VDE 0636 Part 201; Double indicator; 0% cadmium; Non-isolated gripping lugs; Lead free contact blades; Dimensions according to DIN 43 620 parts 1 to 4; IEC 60269-1 and -2
$188.72
/EA
NOT CURRENTLY IN STOCK
NH 1 25A 500V GG
Item #:
N201860
Supplier Part #: N201860
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Dimensions according to DIN 43 620 parts 1 to 4; 0% cadmium; Lead free contact blades; VDE 0636 Part 201; Non-isolated gripping lugs; IEC 60269-1 and -2; Double indicator
$182.93
/EA
NOT CURRENTLY IN STOCK
NH 1 100A 400V GG
Item #:
N223710
Supplier Part #: N223710
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.
IEC 60269-1 and -2; Non-isolated gripping lugs; 0% cadmium; Double indicator; VDE 0636 Part 201; Lead free contact blades; Dimensions according to DIN 43 620 Parts 1 to 4
$199.19
/EA
NOT CURRENTLY IN STOCK
6,9 URD 1 PV 0315
Item #:
N320379
Supplier Part #: N320379
Brand:
Mersen
The 690/700V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for today's power conversion equipment. These NH style fuse-links are defined as per DIN 43620/00 for a worldwide acceptance into NH modular system fuse-holders, fuse switch disconnectors for direct installation. The Protistor® have been engineered to provide state-of-the-art protection for semiconductors diodes, thyristors, GTO's and IGBT devices. Fuses are assembled with pure silver, die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
IEC 60269-4 Compliance; Current limiting; Indication system with double indicator; Superior cycling capability; Ultra fast acting; aR Class according to VDE 636-23 and IEC 60269-4; Very low I²t for improved semiconductor protection; UL/CSA Recognized Component; Multiple body sizes
$931.18
/EA
NOT CURRENTLY IN STOCK
NH 1 200A 500V GG SGL
Item #:
P217225
Supplier Part #: P217225
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
0% cadmium; Lead free contact blades; Isolated metal gripping lugs (SGL); VDE 0636 Part 201; Dimensions according to DIN 43 620 Parts 1 to 4; Double indicator; IEC 60269-1 and -2
$224.27
/EA
NOT CURRENTLY IN STOCK
NH 1 200A 500V GG
Item #:
P218766
Supplier Part #: P218766
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Lead free contact blades; IEC 60269-1 and -2; Dimensions according to DIN 43 620 parts 1 to 4; 0% cadmium; Non-isolated gripping lugs; VDE 0636 Part 201; Double indicator
$190.16
/EA
NOT CURRENTLY IN STOCK
NH 1 125A 400V GG
Item #:
P223711
Supplier Part #: P223711
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.
Double indicator; 0% cadmium; Non-isolated gripping lugs; IEC 60269-1 and -2; Lead free contact blades; VDE 0636 Part 201; Dimensions according to DIN 43 620 Parts 1 to 4
$199.19
/EA
NOT CURRENTLY IN STOCK
6,9 URD 1 PV 0350
Item #:
P320380
Supplier Part #: P320380
Brand:
Mersen
The 690/700V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for today's power conversion equipment. These NH style fuse-links are defined as per DIN 43620/00 for a worldwide acceptance into NH modular system fuse-holders, fuse switch disconnectors for direct installation. The Protistor® have been engineered to provide state-of-the-art protection for semiconductors diodes, thyristors, GTO's and IGBT devices. Fuses are assembled with pure silver, die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
Very low I²t for improved semiconductor protection; Current limiting; Multiple body sizes; Superior cycling capability; UL/CSA Recognized Component; aR Class according to VDE 636-23 and IEC 60269-4; IEC 60269-4 Compliance; Ultra fast acting; Indication system with double indicator
$969.37
/EA
NOT CURRENTLY IN STOCK
