Search in Category
Fuses
Search Filters
-
NH000 x
Filter Your Search
Brand
Country Of Origin
Voltage
Shop by Category
Loading...
Fuses
Power ProductsFuses
Viewing Page 3 of 18
(172 results)
NH 000 80A 400V GG SGL
Item #:
C223700
Supplier Part #: C223700
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.
Double indicator; 0% cadmium; Dimensions according to DIN 43 620 Parts 1 to 4; VDE 0636 Part 201; Isolated metal gripping lugs (SGL); IEC 60269-1 and -2; Lead free contact blades
$130.06
/EA
NOT CURRENTLY IN STOCK
NH 000 80A 500V AM
Item #:
C227863
Supplier Part #: C227863
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
Dimensions according to DIN 43 620 parts 1 to 4; Non-isolated gripping lugs; Lead free contact blades; 0% cadmium; IEC 60269-1 and -2; Double indicator; VDE 0636 Part 201
$102.57
/EA
NOT CURRENTLY IN STOCK
6,9 URD 000 PV 040
Item #:
C320047
Supplier Part #: C320047
Brand:
Mersen
The 690/700V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for today's power conversion equipment. These NH style fuse-links are defined as per DIN 43620/00 for a worldwide acceptance into NH modular system fuse-holders, fuse switch disconnectors for direct installation. The Protistor® have been engineered to provide state-of-the-art protection for semiconductors diodes, thyristors, GTO's and IGBT devices. Fuses are assembled with pure silver, die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
Very low I²t for improved semiconductor protection; Superior cycling capability; Ultra fast acting; UL/CSA Recognized Component; IEC 60269-4 Compliance; Multiple body sizes; aR Class according to VDE 636-23 and IEC 60269-4; Current limiting; Indication system with double indicator
$302.53
/EA
NOT CURRENTLY IN STOCK
6,9 URB 000 D08 V 315
Item #:
C330029
Supplier Part #: C330029
Brand:
Mersen
The 690/700V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for small power conversion equipment. These ultra-fast acting aR fuses have been engineered to provide state-of-the-art protection for semiconductors diodes, thyristors and IGBT devices. They are assembled with die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
Ultra fast acting; Superior cycling capability; UL/CSA Recognized Component; IEC 60269-4 Compliance; Very low I²t for improved semiconductor protection; AC: UL Guide No. E76491; aR Class according to IEC 60269-4 and VDE 636-23
$253.79
/EA
NOT CURRENTLY IN STOCK
6,9 URB 000 BS 88/080
Item #:
C330052
Supplier Part #: C330052
Brand:
Mersen
The 690/700V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for small power conversion equipment. These ultra-fast acting aR fuses have been engineered to provide state-of-the-art protection for semiconductors diodes, thyristors and IGBT devices. They are assembled with die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
Superior cycling capability; Very low I²t for improved semiconductor protection; IEC 60269-4 Compliance; Ultra fast acting; AC: UL Guide No. E76491; UL/CSA Recognized Component; aR Class according to IEC 60269-4 and VDE 636-23
$443.53
/EA
NOT CURRENTLY IN STOCK
NH 000 2A 500V GG SGL
Item #:
C219652
Supplier Part #: C219652
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Double indicator; VDE 0636 Part 201; 0% cadmium; Isolated metal gripping lugs (SGL); Lead free contact blades; Dimensions according to DIN 43 620 Parts 1 to 4; IEC 60269-1 and -2
$119.44
/EA
NOT CURRENTLY IN STOCK
NH 000 32A 500V GG SGL
Item #:
D213489
Supplier Part #: D213489
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
IEC 60269-1 and -2; Double indicator; VDE 0636 Part 201; 0% cadmium; Dimensions according to DIN 43 620 Parts 1 to 4; Lead free contact blades; Isolated metal gripping lugs (SGL)
$119.44
/EA
NOT CURRENTLY IN STOCK
NH 000 6A 500V GG
Item #:
D213995
Supplier Part #: D213995
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Double indicator; Lead free contact blades; Non-isolated gripping lugs; 0% cadmium; VDE 0636 Part 201; IEC 60269-1 and -2; Dimensions according to DIN 43 620 parts 1 to 4
$119.44
/EA
NOT CURRENTLY IN STOCK
NH 000 40A 500V GG SGL
Item #:
D219653
Supplier Part #: D219653
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Dimensions according to DIN 43 620 Parts 1 to 4; Double indicator; Isolated metal gripping lugs (SGL); Lead free contact blades; 0% cadmium; IEC 60269-1 and -2; VDE 0636 Part 201
$130.06
/EA
NOT CURRENTLY IN STOCK
6,9 URB 000 BS 88/125
Item #:
E330054
Supplier Part #: E330054
Brand:
Mersen
The 690/700V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for small power conversion equipment. These ultra-fast acting aR fuses have been engineered to provide state-of-the-art protection for semiconductors diodes, thyristors and IGBT devices. They are assembled with die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
Ultra fast acting; UL/CSA Recognized Component; IEC 60269-4 Compliance; AC: UL Guide No. E76491; Very low I²t for improved semiconductor protection; Superior cycling capability; aR Class according to IEC 60269-4 and VDE 636-23
$302.87
/EA
NOT CURRENTLY IN STOCK
