Search in Category
Fuses
Filter Your Search
Country Of Origin
Voltage
Shop by Category
Loading...
Fuses
Power ProductsFuses
Viewing Page 1 of 9
(90 results)
NH 3C 300A 500V GG
Item #:
A212635
Supplier Part #: A212635
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
0% cadmium; IEC 60269-1 and -2; Lead free contact blades; VDE 0636 Part 201; Double indicator; Dimensions according to DIN 43 620 parts 1 to 4; Non-isolated gripping lugs
$366.42
/EA
NOT CURRENTLY IN STOCK
NH 3 300A 690V GG
Item #:
A228505
Supplier Part #: A228505
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Lead free contact blades; Non-isolated gripping lugs; Double indicator; IEC 60269-1 and -2; VDE 0636 Part 201; 0% cadmium; Dimensions according to DIN 43 620 parts 1 to 4
$366.42
/EA
NOT CURRENTLY IN STOCK
BASE NH 3-PP F/RAIL. 2P
Item #:
B214154
Supplier Part #: B214154
Brand:
Mersen
NH fuse-bases are available for delivery in single-pole and three-pole designs and can be closely mounted in parallel rows. Each three-pole base is upplied with two phase-partition walls. NH fuse-links plugon covers which clip onto the contact springs can also be supplied for these bases. Plastic fuse-bases sizes 00 to 3 have a single-part plastic base while size 4 has a metal baseplate with 2 ceramic bases. The stable silver-plated contact springs are made of electrolytic copper and formed from one piece. Separate springing is provided by highly resilient captive steel springs, making the contact invulnerable to high thermal stress. Size 4 NH fuse-bases are designed for size 4 fuse-links with 8 mm contact blades. A microswitch (250VAC/10A, terminal size 6.3x0.8mm) can be used with NH fuse-links with striker, it operates when fuse melts or where there is no fuse-link. Indirect touch protection fuse bases no microswitch possible. Rated impulse withstand voltage Uimp 6kV / 8kV (sizes 00 / 0-4)
Screw or rail mounting; Polyamide insulating bases; High-pressure spring contacts; Dimensions in accordance with DIN 43620; IEC 60269 Compliance; DIN VDE 0636-2, 0636-21; Silver-plated contacts; Multipolar bases possible by direct linkage in 00 size and with separator accessory in sizes 0, 1, 2 and 3
$796.90
/EA
NOT CURRENTLY IN STOCK
NH 3 355A 500V GG SGL
Item #:
B216201
Supplier Part #: B216201
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Dimensions according to DIN 43 620 parts 1 to 4; VDE 0636 Part 201; IEC 60269-1 and -2; Non-isolated gripping lugs; 0% cadmium; Double indicator; Lead free contact blades
$366.42
/EA
NOT CURRENTLY IN STOCK
690V NH3 C/P gG 315A
Item #:
B217719
Supplier Part #: B217719
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Dimensions according to DIN 43 620 Parts 1 to 4; 0% cadmium; IEC 60269-1 and -2; VDE 0636 Part 201; Lead free contact blades
$480.94
/EA
NOT CURRENTLY IN STOCK
NH 3 315A 690V GG
Item #:
B228506
Supplier Part #: B228506
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
IEC 60269-1 and -2; 0% cadmium; Dimensions according to DIN 43 620 parts 1 to 4; Double indicator; VDE 0636 Part 201; Lead free contact blades; Non-isolated gripping lugs
$381.09
/EA
NOT CURRENTLY IN STOCK
BASE NH 3-PP F/TORN. 2P
Item #:
D214662
Supplier Part #: D214662
Brand:
Mersen
NH fuse-bases are available for delivery in single-pole and three-pole designs and can be closely mounted in parallel rows. Each three-pole base is upplied with two phase-partition walls. NH fuse-links plugon covers which clip onto the contact springs can also be supplied for these bases. Plastic fuse-bases sizes 00 to 3 have a single-part plastic base while size 4 has a metal baseplate with 2 ceramic bases. The stable silver-plated contact springs are made of electrolytic copper and formed from one piece. Separate springing is provided by highly resilient captive steel springs, making the contact invulnerable to high thermal stress. Size 4 NH fuse-bases are designed for size 4 fuse-links with 8 mm contact blades. A microswitch (250VAC/10A, terminal size 6.3x0.8mm) can be used with NH fuse-links with striker, it operates when fuse melts or where there is no fuse-link. Indirect touch protection fuse bases no microswitch possible. Rated impulse withstand voltage Uimp 6kV / 8kV (sizes 00 / 0-4)
IEC 60269 Compliance; High-pressure spring contacts; Silver-plated contacts; Polyamide insulating bases; Screw or rail mounting; Multipolar bases possible by direct linkage in 00 size and with separator accessory in sizes 0, 1, 2 and 3; Dimensions in accordance with DIN 43620; DIN VDE 0636-2, 0636-21
$759.83
/EA
NOT CURRENTLY IN STOCK
FUS. AM NH3 C/P 355A
Item #:
D215168
Supplier Part #: D215168
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current, it must be handled by a qualified professional.
IEC 60269-1 and -2; Dimensions according to DIN 43 620 Parts 1 to 4; Lead free contact blades; VDE 0636 Part 201; 0% cadmium
$454.74
/EA
NOT CURRENTLY IN STOCK
NH 3 500A 500V GG SGL
Item #:
D216709
Supplier Part #: D216709
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Double indicator; IEC 60269-1 and -2; Lead free contact blades; 0% cadmium; Isolated metal gripping lugs (SGL); VDE 0636 Part 201; Dimensions according to DIN 43 620 Parts 1 to 4
$436.58
/EA
NOT CURRENTLY IN STOCK
NH 3 250A 690V AM
Item #:
D227979
Supplier Part #: D227979
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
Lead free contact blades; 0% cadmium; IEC 60269-1 and -2; Double indicator; Non-isolated gripping lugs; Dimensions according to DIN 43 620 parts 1 to 4; VDE 0636 Part 201
$438.74
/EA
NOT CURRENTLY IN STOCK
