Browse Categories

Search in Category

Fuses

Search Filters

  • 7200 V x

Filter Your Search

Show Attribute Brand
Hide Attribute Diameter

Shop by Category

Fuses

Power Products/Fuses 
Viewing Page 1 of 5 (48 results)
Sort By:
View:
7.2KV 3R R RATED BOLT-IN

7.2KV 3R R RATED BOLT-IN

Item #: A072B1DAR0-3R

Supplier Part #: A072B1DAR0-3R
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aa35cd884330ef55c2e69d7afaf5b9ad8e93d185.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aa35cd884330ef55c2e69d7afaf5b9ad8e93d185.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/eea9872ec99081e36eb250c5ab544f7befdc6bc4.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/eea9872ec99081e36eb250c5ab544f7befdc6bc4.pdf

Mersen R-Rated fuses are current-limiting, high interrupting rating fuses intended for the short circuit protection of medium voltage motors and motor controllers. R-Rated fuses are back-up fuses that have a minimum interrupting rating, and must be coordinated with overload relays in combination motor starters. The motor starter manufacturer generally specifies the R-Rated fuse size. These fuses are single, double, triple or quadruple barrels 3 inches diameter with end mounts designed for bolting directly to equipment bus or terminal pads

Metal embossed catalog number and manufacturing date for lasting identification; Current-limiting for superior equipment protection; The Amp-Trap Bolt-in series are UL Recognized; Bolt-in mounting for direct connection to bus or terminals; Blown-fuse indicator to give positive identification of open fuse; UL Recognized File E93367

$1,414.19 /EA
NOT CURRENTLY IN STOCK
7.2KV 32R R-RATED BOLT IN

7.2KV 32R R-RATED BOLT IN

Item #: A072B2D0R0-32R

Supplier Part #: A072B2D0R0-32R
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aa35cd884330ef55c2e69d7afaf5b9ad8e93d185.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aa35cd884330ef55c2e69d7afaf5b9ad8e93d185.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/eea9872ec99081e36eb250c5ab544f7befdc6bc4.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/eea9872ec99081e36eb250c5ab544f7befdc6bc4.pdf

Mersen R-Rated fuses are current-limiting, high interrupting rating fuses intended for the short circuit protection of medium voltage motors and motor controllers. R-Rated fuses are back-up fuses that have a minimum interrupting rating, and must be coordinated with overload relays in combination motor starters. The motor starter manufacturer generally specifies the R-Rated fuse size. These fuses are single, double, triple or quadruple barrels 3 inches diameter with end mounts designed for bolting directly to equipment bus or terminal pads

Bolt-in mounting for direct connection to bus or terminals; UL Recognized File E93367; The Amp-Trap Bolt-in series are UL Recognized; Blown-fuse indicator to give positive identification of open fuse; Metal embossed catalog number and manufacturing date for lasting identification; Current-limiting for superior equipment protection

$5,194.12 /EA
NOT CURRENTLY IN STOCK
7.2KV 24R R RATED BOLT-IN

7.2KV 24R R RATED BOLT-IN

Item #: A072B2DAR0-24R

Supplier Part #: A072B2DAR0-24R
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aa35cd884330ef55c2e69d7afaf5b9ad8e93d185.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aa35cd884330ef55c2e69d7afaf5b9ad8e93d185.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/eea9872ec99081e36eb250c5ab544f7befdc6bc4.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/eea9872ec99081e36eb250c5ab544f7befdc6bc4.pdf

Mersen R-Rated fuses are current-limiting, high interrupting rating fuses intended for the short circuit protection of medium voltage motors and motor controllers. R-Rated fuses are back-up fuses that have a minimum interrupting rating, and must be coordinated with overload relays in combination motor starters. The motor starter manufacturer generally specifies the R-Rated fuse size. These fuses are single, double, triple or quadruple barrels 3 inches diameter with end mounts designed for bolting directly to equipment bus or terminal pads

The Amp-Trap Bolt-in series are UL Recognized; Metal embossed catalog number and manufacturing date for lasting identification; Current-limiting for superior equipment protection; Blown-fuse indicator to give positive identification of open fuse; Bolt-in mounting for direct connection to bus or terminals; UL Recognized File E93367

$3,921.78 /EA
NOT CURRENTLY IN STOCK
7.2KV 32R R-RATED SP IND BOLT-

7.2KV 32R R-RATED SP IND BOLT-

Item #: A072B2DCR0-32R

Supplier Part #: A072B2DCR0-32R
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aa35cd884330ef55c2e69d7afaf5b9ad8e93d185.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aa35cd884330ef55c2e69d7afaf5b9ad8e93d185.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/eea9872ec99081e36eb250c5ab544f7befdc6bc4.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/eea9872ec99081e36eb250c5ab544f7befdc6bc4.pdf

Mersen R-Rated fuses are current-limiting, high interrupting rating fuses intended for the short circuit protection of medium voltage motors and motor controllers. R-Rated fuses are back-up fuses that have a minimum interrupting rating, and must be coordinated with overload relays in combination motor starters. The motor starter manufacturer generally specifies the R-Rated fuse size. These fuses are single, double, triple or quadruple barrels 3 inches diameter with end mounts designed for bolting directly to equipment bus or terminal pads

Current-limiting for superior equipment protection; UL Recognized File E93367; The Amp-Trap Bolt-in series are UL Recognized; Blown-fuse indicator to give positive identification of open fuse; Metal embossed catalog number and manufacturing date for lasting identification; Bolt-in mounting for direct connection to bus or terminals

$5,453.83 /EA
NOT CURRENTLY IN STOCK
7.2KV, 57X R-RATED BOLT IN SP

7.2KV, 57X R-RATED BOLT IN SP

Item #: A072B3DBR0-57X

Supplier Part #: A072B3DBR0-57X
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aa35cd884330ef55c2e69d7afaf5b9ad8e93d185.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/aa35cd884330ef55c2e69d7afaf5b9ad8e93d185.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/eea9872ec99081e36eb250c5ab544f7befdc6bc4.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/eea9872ec99081e36eb250c5ab544f7befdc6bc4.pdf

Mersen R-Rated fuses are current-limiting, high interrupting rating fuses intended for the short circuit protection of medium voltage motors and motor controllers. R-Rated fuses are back-up fuses that have a minimum interrupting rating, and must be coordinated with overload relays in combination motor starters. The motor starter manufacturer generally specifies the R-Rated fuse size. These fuses are single, double, triple or quadruple barrels 3 inches diameter with end mounts designed for bolting directly to equipment bus or terminal pads

Blown-fuse indicator to give positive identification of open fuse; The Amp-Trap Bolt-in series are UL Recognized; Current-limiting for superior equipment protection; Bolt-in mounting for direct connection to bus or terminals; UL Recognized File E93367; Metal embossed catalog number and manufacturing date for lasting identification

$18,534.45 /EA
NOT CURRENTLY IN STOCK
7.2KV,442mm,3DIA,MV FUSE 4R

7.2KV,442mm,3DIA,MV FUSE 4R

Item #: A072D1DSR0-4R

Supplier Part #: A072D1DSR0-4R
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/9699fe29c06b91e32f69e508aaccd5f7b8152f17.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/9699fe29c06b91e32f69e508aaccd5f7b8152f17.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c54eb8db0cac8ea9f2c3c08b51db99ae2ddeae99.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c54eb8db0cac8ea9f2c3c08b51db99ae2ddeae99.pdf

Amp-Trap® R-Rated DIN style fuses are current-limiting, high interrupting rating fuses, intended for the short circuit protection of medium voltage motors and motor controllers. This product range offers North American R-Rated performance in the IEC 282-1 DIN mounting configuration of 442mm. R-Rated fuses are applied as back up fuses that have a minimum interrupting rating, and must be coordinated with overload relays in combination motor starters. Amp-Trap R-Rated, DIN type fuses are offered in voltage ratings of 3.3kV, 5.3kV and 7.2kV in ratings from 2R to 19R. All fuses within this product group are UL component recognized. DEFINITIONS ,R-Rating R-Rated fuses are back-up fuses that operate as follows (Per ANSI C37.46-2000) An R-Rated fuse will melt in the range of 15 to 35 seconds at a value of current equal to 100 times the “R” rating ,Back-up Current-Limiting Fuses A back-up current-limiting fuse is a fuse that can interrupt any current between its rated minimum interrupting current and its maximum interrupting current. Back-up fuses are not designed or intended to open under overload conditions ,Continuous Ampere Rating at 40°C The continuous amp rating defines the thermal capability of the fuse per ANSI C37.46 and should not be the sole factor in fuse selection ,Spring-Reinforced Clip MR45 & Spring Ref.# L096472 ,Fuse-Holder SI 24/442 Ref # K209424 In compliance with IEC 282-1, DIN standard 43625 ,Note Ratings above 19R may be achieved by paralleling fuses. Please consult factory for details

Current-limiting for superior equipment protection; Blown fuse indicator provides positive identification of open fuse. 4.5lb tripping force – 1.0”; UL recognized component File E93367

$1,239.71 /EA
NOT CURRENTLY IN STOCK
7.2KV,442mm,3DIA,MV FUSE 5R

7.2KV,442mm,3DIA,MV FUSE 5R

Item #: A072D1DSR0-5R

Supplier Part #: A072D1DSR0-5R
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/9699fe29c06b91e32f69e508aaccd5f7b8152f17.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/9699fe29c06b91e32f69e508aaccd5f7b8152f17.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c54eb8db0cac8ea9f2c3c08b51db99ae2ddeae99.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c54eb8db0cac8ea9f2c3c08b51db99ae2ddeae99.pdf

Amp-Trap® R-Rated DIN style fuses are current-limiting, high interrupting rating fuses, intended for the short circuit protection of medium voltage motors and motor controllers. This product range offers North American R-Rated performance in the IEC 282-1 DIN mounting configuration of 442mm. R-Rated fuses are applied as back up fuses that have a minimum interrupting rating, and must be coordinated with overload relays in combination motor starters. Amp-Trap R-Rated, DIN type fuses are offered in voltage ratings of 3.3kV, 5.3kV and 7.2kV in ratings from 2R to 19R. All fuses within this product group are UL component recognized. DEFINITIONS ,R-Rating R-Rated fuses are back-up fuses that operate as follows (Per ANSI C37.46-2000) An R-Rated fuse will melt in the range of 15 to 35 seconds at a value of current equal to 100 times the “R” rating ,Back-up Current-Limiting Fuses A back-up current-limiting fuse is a fuse that can interrupt any current between its rated minimum interrupting current and its maximum interrupting current. Back-up fuses are not designed or intended to open under overload conditions ,Continuous Ampere Rating at 40°C The continuous amp rating defines the thermal capability of the fuse per ANSI C37.46 and should not be the sole factor in fuse selection ,Spring-Reinforced Clip MR45 & Spring Ref.# L096472 ,Fuse-Holder SI 24/442 Ref # K209424 In compliance with IEC 282-1, DIN standard 43625 ,Note Ratings above 19R may be achieved by paralleling fuses. Please consult factory for details

Blown fuse indicator provides positive identification of open fuse. 4.5lb tripping force – 1.0”; Current-limiting for superior equipment protection; UL recognized component File E93367

$1,407.99 /EA
NOT CURRENTLY IN STOCK
7.2KV,442mm,3DIA,MV FUSE 6R

7.2KV,442mm,3DIA,MV FUSE 6R

Item #: A072D1DSR0-6R

Supplier Part #: A072D1DSR0-6R
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/9699fe29c06b91e32f69e508aaccd5f7b8152f17.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/9699fe29c06b91e32f69e508aaccd5f7b8152f17.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c54eb8db0cac8ea9f2c3c08b51db99ae2ddeae99.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c54eb8db0cac8ea9f2c3c08b51db99ae2ddeae99.pdf

Amp-Trap® R-Rated DIN style fuses are current-limiting, high interrupting rating fuses, intended for the short circuit protection of medium voltage motors and motor controllers. This product range offers North American R-Rated performance in the IEC 282-1 DIN mounting configuration of 442mm. R-Rated fuses are applied as back up fuses that have a minimum interrupting rating, and must be coordinated with overload relays in combination motor starters. Amp-Trap R-Rated, DIN type fuses are offered in voltage ratings of 3.3kV, 5.3kV and 7.2kV in ratings from 2R to 19R. All fuses within this product group are UL component recognized. DEFINITIONS ,R-Rating R-Rated fuses are back-up fuses that operate as follows (Per ANSI C37.46-2000) An R-Rated fuse will melt in the range of 15 to 35 seconds at a value of current equal to 100 times the “R” rating ,Back-up Current-Limiting Fuses A back-up current-limiting fuse is a fuse that can interrupt any current between its rated minimum interrupting current and its maximum interrupting current. Back-up fuses are not designed or intended to open under overload conditions ,Continuous Ampere Rating at 40°C The continuous amp rating defines the thermal capability of the fuse per ANSI C37.46 and should not be the sole factor in fuse selection ,Spring-Reinforced Clip MR45 & Spring Ref.# L096472 ,Fuse-Holder SI 24/442 Ref # K209424 In compliance with IEC 282-1, DIN standard 43625 ,Note Ratings above 19R may be achieved by paralleling fuses. Please consult factory for details

UL recognized component File E93367; Current-limiting for superior equipment protection; Blown fuse indicator provides positive identification of open fuse. 4.5lb tripping force – 1.0”

$1,510.35 /EA
NOT CURRENTLY IN STOCK
7200V 3/4E PT FUSE

7200V 3/4E PT FUSE

Item #: A720T3/4E-1

Supplier Part #: A720T3/4E-1
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/48ea5a4fb3129fa750f3b97486005ed36f07ada9.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/48ea5a4fb3129fa750f3b97486005ed36f07ada9.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/92b444e61a066ee628c9ead4f8c01e5e4dc6f768.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/92b444e61a066ee628c9ead4f8c01e5e4dc6f768.pdf

Mersen PT fuses are current-limiting fuses with high interrupting rating, used for the primary winding protection of potential transformer. They are small dimension ferrule type fuses and mount in standard clips. Current ratings are from 0.25A to 5A

Ferrule mounting for standard clips and interchangeability with other brands of fuses; Blown-fuse indicator to give positive identification of open fuse fuse is available on the 9F60 series; Metal embossed catalog number and manufacturing date for lasting identification; Current-limiting for superior equipment protection; Non-venting for silent operation

$190.43 /EA
NOT CURRENTLY IN STOCK
PT FUSE 7200V 3E

PT FUSE 7200V 3E

Item #: A720T3E-1

Supplier Part #: A720T3E-1
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/48ea5a4fb3129fa750f3b97486005ed36f07ada9.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/48ea5a4fb3129fa750f3b97486005ed36f07ada9.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/92b444e61a066ee628c9ead4f8c01e5e4dc6f768.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/92b444e61a066ee628c9ead4f8c01e5e4dc6f768.pdf

Mersen PT fuses are current-limiting fuses with high interrupting rating, used for the primary winding protection of potential transformer. They are small dimension ferrule type fuses and mount in standard clips. Current ratings are from 0.25A to 5A

Metal embossed catalog number and manufacturing date for lasting identification; Ferrule mounting for standard clips and interchangeability with other brands of fuses; Blown-fuse indicator to give positive identification of open fuse fuse is available on the 9F60 series; Non-venting for silent operation; Current-limiting for superior equipment protection

$192.55 /EA
NOT CURRENTLY IN STOCK
  • 1
  • 2
  • 3
  • 4
  • 5
  • NEXT »