Search in Category
Fuses
Filter Your Search
Brand
Voltage
Shop by Category
Loading...
Fuses
Power ProductsFuses
Viewing Page 1 of 3
(27 results)
2.0KV, 165AMPS, TYPE 10, MV CA
Item #:
A200C165-10
Supplier Part #: A200C165-10
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products
High interrupting capacity; Clip style mount; Current limitation; Bus mount; ANSI C37-41; Blown-fuse indication; Direct mount; Non-venting for silent operation
$443.13
/EA
NOT CURRENTLY IN STOCK
2.0KV, 175AMPS, TYPE 10, MV CA
Item #:
A200C175-10
Supplier Part #: A200C175-10
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products
ANSI C37-41; Current limitation; High interrupting capacity; Non-venting for silent operation; Clip style mount; Bus mount; Blown-fuse indication; Direct mount
$443.13
/EA
NOT CURRENTLY IN STOCK
2.5KV, 150AMPS, TYPE 10, MV CA
Item #:
A250C150-10
Supplier Part #: A250C150-10
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products
Bus mount; Blown-fuse indication; Direct mount; High interrupting capacity; ANSI C37-41; Non-venting for silent operation; Clip style mount; Current limitation
$392.62
/EA
NOT CURRENTLY IN STOCK
3.0kV 100A TYPE 10, MV CAP
Item #:
A300C100-10
Supplier Part #: A300C100-10
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products
Clip style mount; High interrupting capacity; ANSI C37-41; Non-venting for silent operation; Blown-fuse indication; Bus mount; Direct mount; Current limitation
$443.94
/EA
NOT CURRENTLY IN STOCK
3.0kV 125A TYPE 60, MV CAP
Item #:
A300C125-60
Supplier Part #: A300C125-60
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products
Blown-fuse indication; High interrupting capacity; Clip style mount; Bus mount; ANSI C37-41; Current limitation; Non-venting for silent operation; Direct mount
$519.25
/EA
NOT CURRENTLY IN STOCK
3.0kV 150A TYPE 10, MV CAP
Item #:
A300C150-10
Supplier Part #: A300C150-10
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products
High interrupting capacity; Direct mount; Current limitation; Bus mount; Clip style mount; ANSI C37-41; Blown-fuse indication; Non-venting for silent operation
$519.25
/EA
NOT CURRENTLY IN STOCK
3.0kV 175A TYPE 10, MV CAP
Item #:
A300C175-10
Supplier Part #: A300C175-10
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products
Direct mount; Clip style mount; Bus mount; ANSI C37-41; Non-venting for silent operation; High interrupting capacity; Current limitation; Blown-fuse indication
$519.25
/EA
NOT CURRENTLY IN STOCK
1.5KV, 50AMPS, TYPE 10, MV CAP
Item #:
A150C50-10
Supplier Part #: A150C50-10
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are current-limiting operating without noise or discharge and are designed to be used indoors or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the usage of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost and space saving solutions and a large choice of equivalent products to users.
Bus mounting; Blown fuse indicator; Clip style mounting; ANSI C37-41; Non-venting for silent operation; High interrupting capacity; Direct mounting; Current-limiting
$319.87
/EA
NOT CURRENTLY IN STOCK
1.5KV, 60 AMPS, TYPE 10, MV CA
Item #:
A150C60-10
Supplier Part #: A150C60-10
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are current-limiting operating without noise or discharge and are designed to be used indoors or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the usage of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost and space saving solutions and a large choice of equivalent products to users.
High interrupting capacity; Non-venting for silent operation; ANSI C37-41; Clip style mounting; Bus mounting; Direct mounting; Current-limiting; Blown fuse indicator
$319.87
/EA
NOT CURRENTLY IN STOCK
1.5KV, 75 AMPS, TYPE 10, MV CA
Item #:
A150C75-10
Supplier Part #: A150C75-10
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are current-limiting operating without noise or discharge and are designed to be used indoors or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the usage of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost and space saving solutions and a large choice of equivalent products to users.
ANSI C37-41; High interrupting capacity; Current-limiting; Clip style mounting; Direct mounting; Bus mounting; Non-venting for silent operation; Blown fuse indicator
$319.87
/EA
NOT CURRENTLY IN STOCK
