Search in Category
Fuses
Search term required.
Search Filters
-
1.42 in x
Filter Your Search
Brand
Country Of Origin
Fuse Size
Voltage
Shop by Category
Loading...
Fuses
Viewing Page 1 of 5
(48 results)
CC1051 CP GRB 36 127 40
Item #:
G089499
Supplier Part #: G089499
Brand:
Mersen
Mersen DC offers provide a very high performant protection for railway power and auxiliary circuits. Mersen DC Semiconductor fuse-links were developed to provide improved performance required by today's new DC equipment. These fuse-links are typically operated at more elevated temperature than other fuse type, have lower I²t to minimize damage to protected components on short circuits, lower watts loss and longer life.
$1,092.50
/EA
NOT CURRENTLY IN STOCK
CC1051 CP GRB 36 127 50
Item #:
H089500
Supplier Part #: H089500
Brand:
Mersen
Mersen DC offers provide a very high performant protection for railway power and auxiliary circuits. Mersen DC Semiconductor fuse-links were developed to provide improved performance required by today's new DC equipment. These fuse-links are typically operated at more elevated temperature than other fuse type, have lower I²t to minimize damage to protected components on short circuits, lower watts loss and longer life.
$1,092.50
/EA
NOT CURRENTLY IN STOCK
CC1591 CP GRC 36 190 40
Item #:
M080419
Supplier Part #: M080419
Brand:
Mersen
Mersen DC offers provide a very high performant protection for railway power and auxiliary circuits. Mersen DC Semiconductor fuse-links were developed to provide improved performance required by today's new DC equipment. These fuse-links are typically operated at more elevated temperature than other fuse type, have lower I²t to minimize damage to protected components on short circuits, lower watts loss and longer life.
$2,595.92
/EA
NOT CURRENTLY IN STOCK
CC1591 CP GRC 36 190 63
Item #:
P080421
Supplier Part #: P080421
Brand:
Mersen
Mersen DC offers provide a very high performant protection for railway power and auxiliary circuits. Mersen DC Semiconductor fuse-links were developed to provide improved performance required by today's new DC equipment. These fuse-links are typically operated at more elevated temperature than other fuse type, have lower I²t to minimize damage to protected components on short circuits, lower watts loss and longer life.
$2,708.00
/EA
NOT CURRENTLY IN STOCK
CC2000 CP GRB 36.250 0,8
Item #:
P221135
Supplier Part #: P221135
Brand:
Mersen
Mersen DC offers provide a very high performant protection for railway power and auxiliary circuits. Mersen DC Semiconductor fuse-links were developed to provide improved performance required by today's new DC equipment. These fuse-links are typically operated at more elevated temperature than other fuse type, have lower I²t to minimize damage to protected components on short circuits, lower watts loss and longer life.
$1,267.26
/EA
NOT CURRENTLY IN STOCK
CC4000 CP GRC 36.400 1
Item #:
R221137
Supplier Part #: R221137
Brand:
Mersen
Mersen DC offers provide a very high performant protection for railway power and auxiliary circuits. Mersen DC Semiconductor fuse-links were developed to provide improved performance required by today's new DC equipment. These fuse-links are typically operated at more elevated temperature than other fuse type, have lower I²t to minimize damage to protected components on short circuits, lower watts loss and longer life.
$2,230.27
/EA
NOT CURRENTLY IN STOCK
2.0KV, 200 AMPS, TYPE 10,MV CA
Item #:
A200C200-10
Supplier Part #: A200C200-10
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products
Blown-fuse indication; Clip style mount; Current limitation; Bus mount; High interrupting capacity; Non-venting for silent operation; ANSI C37-41; Direct mount
$443.13
/EA
NOT CURRENTLY IN STOCK
2.5KV, 150AMPS, TYPE 10, MV CA
Item #:
A250C150-10
Supplier Part #: A250C150-10
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products
Bus mount; Blown-fuse indication; Direct mount; High interrupting capacity; ANSI C37-41; Non-venting for silent operation; Clip style mount; Current limitation
$392.62
/EA
NOT CURRENTLY IN STOCK
2.5KV, 150A, TYPE 11, MV CAP
Item #:
A250C150-11
Supplier Part #: A250C150-11
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products
Clip style mount; Current limitation; Bus mount; Direct mount; High interrupting capacity; Non-venting for silent operation; ANSI C37-41; Blown-fuse indication
$392.62
/EA
NOT CURRENTLY IN STOCK
2.5KV, 75 AMPS, TYPE 10, MV CA
Item #:
A250C75-10
Supplier Part #: A250C75-10
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products
Blown-fuse indication; ANSI C37-41; Current limitation; Direct mount; Non-venting for silent operation; High interrupting capacity; Clip style mount; Bus mount
$335.87
/EA
NOT CURRENTLY IN STOCK