Cable Protector Fuse 600V 250 MCM CU - HS Rod To Blade Mount CP Series
Item #:
CP250C8-HS
Product Info
Mersen
Mersen CP cable protectors are special purpose limiters which are crimped or bolted to cables to clear and isolate faults quickly, increasing the reliability of service entrance and distribution runs. They are current-limiting with a 200,000A interrupting rating, yet will carry low cable overloads which are handled by standard protective devices. Cable protectors are rated in terms of cable size and material (Al or Cu). Heat shrinkable (HS) tubing can be specified for field installation. For cables smaller than 4/0, class J fuses can be used.
Crimp terminals for aluminum cable include oxide inhibitor; Molded rubber boots or heat shrinkable tubing available for insulation and protection; Fiberglass bodies for dimensional stability in harsh environments; Catalog number stamped into terminal for permanent identification; Permitted by National Electrical Code®; UL listed to File E305297; Current limiting device
Item Specifications
-
200 kA
-
GMG
-
Tin-Plated Copper And Tin-Plated Brass
-
Rod To Blade
-
Mexico
-
1.44 in
-
80 °C
-
80 °C
-
80 °C
-
-25 °C
-
Crimp and Bolted
-
Bolted
-
Amp-Trap®
-
1.44 in
-
CP
-
600 V
-
Tin-Plated Copper
-
Rod To Blade
-
600 V