Browse Categories

Search in Category

Fuses

Search Filters

  • 50 Hz x

Filter Your Search

Show Attribute Brand
Hide Attribute Connection
Hide Attribute Connection Type
Hide Attribute Country Of Origin
Hide Attribute Diameter
Hide Attribute Fuse Size
Hide Attribute Height
Hide Attribute Length
Hide Attribute Type
Hide Attribute Voltage
Hide Attribute Voltage Rating
Hide Attribute Weight
Hide Attribute Width
Hide Attribute Wire Type

Shop by Category

Fuses

Power Products/Fuses 
Viewing Page 9 of 68 (674 results)
Sort By:
View:
THERMALLY PROTECTED MOV 150

THERMALLY PROTECTED MOV 150

Item #: 150TPMOV

Supplier Part #: 150TPMOV
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/068bd0896038deadddbe79ab377d10af07200a92.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/068bd0896038deadddbe79ab377d10af07200a92.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c1cf2ff1a674467060fd0135f05d7b039c5085d7.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c1cf2ff1a674467060fd0135f05d7b039c5085d7.pdf

Mersen’s patented TPMOV technology eliminates common failure modes that occur in the field with standard metal oxide varistors. Internally the TPMOV is comprised of a voltage clamping device and a disconnecting apparatus that monitors the status of the metal oxide disk, making the TPMOV a fail-safe device. In the event of an overvoltage breakdown, the metal oxide disc is securely disconnected from the system power by an arc shield. Upon failure, the TPMOV is also equipped with a visual pin indicator as well as a normally open micro-switch, providing remote indication if applicable. TPMOV7 50% more surge capacity, Same footprint The TPMOV7 is rated for 75kA - 8/20µs peak surge current and is available for maximum continuous operating voltages (MCOV) from 150V to 320VAC.

Built-in visual/remote indication optional; Wave solderable; No additional overcurrent protective device (fuses) required; RoHS Compliant; ANSI/UL 1449 4th Edition, Type 1 Component Assembly SPD, File E210793; Consistent footprint with 25–40mm MOVs; Industry-leading, patented TPMOV technology available in 50kA and 75kA surge capacities

Call
No Longer in Production
THERMALLY PROTECTED MOV 150-HV

THERMALLY PROTECTED MOV 150-HV

Item #: 150TPMOV-HV

Supplier Part #: 150TPMOV-HV
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/068bd0896038deadddbe79ab377d10af07200a92.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/068bd0896038deadddbe79ab377d10af07200a92.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c1cf2ff1a674467060fd0135f05d7b039c5085d7.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c1cf2ff1a674467060fd0135f05d7b039c5085d7.pdf

Mersen’s patented TPMOV technology eliminates common failure modes that occur in the field with standard metal oxide varistors. Internally the TPMOV is comprised of a voltage clamping device and a disconnecting apparatus that monitors the status of the metal oxide disk, making the TPMOV a fail-safe device. In the event of an overvoltage breakdown, the metal oxide disc is securely disconnected from the system power by an arc shield. Upon failure, the TPMOV is also equipped with a visual pin indicator as well as a normally open micro-switch, providing remote indication if applicable. TPMOV7 50% more surge capacity, Same footprint The TPMOV7 is rated for 75kA - 8/20µs peak surge current and is available for maximum continuous operating voltages (MCOV) from 150V to 320VAC.

RoHS Compliant; Wave solderable; Built-in visual/remote indication optional; Consistent footprint with 25–40mm MOVs; No additional overcurrent protective device (fuses) required; Industry-leading, patented TPMOV technology available in 50kA and 75kA surge capacities; ANSI/UL 1449 4th Edition, Type 1 Component Assembly SPD, File E210793

Call
No Longer in Production
150VAC TPMOV SHORT LEADS

150VAC TPMOV SHORT LEADS

Item #: 150TPMOVS

Supplier Part #: 150TPMOVS
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/068bd0896038deadddbe79ab377d10af07200a92.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/068bd0896038deadddbe79ab377d10af07200a92.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c1cf2ff1a674467060fd0135f05d7b039c5085d7.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c1cf2ff1a674467060fd0135f05d7b039c5085d7.pdf

Mersen’s patented TPMOV technology eliminates common failure modes that occur in the field with standard metal oxide varistors. Internally the TPMOV is comprised of a voltage clamping device and a disconnecting apparatus that monitors the status of the metal oxide disk, making the TPMOV a fail-safe device. In the event of an overvoltage breakdown, the metal oxide disc is securely disconnected from the system power by an arc shield. Upon failure, the TPMOV is also equipped with a visual pin indicator as well as a normally open micro-switch, providing remote indication if applicable. TPMOV7 50% more surge capacity, Same footprint The TPMOV7 is rated for 75kA - 8/20µs peak surge current and is available for maximum continuous operating voltages (MCOV) from 150V to 320VAC.

No additional overcurrent protective device (fuses) required; Built-in visual/remote indication optional; RoHS Compliant; Industry-leading, patented TPMOV technology available in 50kA and 75kA surge capacities; ANSI/UL 1449 4th Edition, Type 1 Component Assembly SPD, File E210793; Wave solderable; Consistent footprint with 25–40mm MOVs

Call
No Longer in Production
150V SHORT LEAD MOV

150V SHORT LEAD MOV

Item #: 150TPMOVSL

Supplier Part #: 150TPMOVSL
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/068bd0896038deadddbe79ab377d10af07200a92.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/068bd0896038deadddbe79ab377d10af07200a92.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c1cf2ff1a674467060fd0135f05d7b039c5085d7.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c1cf2ff1a674467060fd0135f05d7b039c5085d7.pdf

Mersen’s patented TPMOV technology eliminates common failure modes that occur in the field with standard metal oxide varistors. Internally the TPMOV is comprised of a voltage clamping device and a disconnecting apparatus that monitors the status of the metal oxide disk, making the TPMOV a fail-safe device. In the event of an overvoltage breakdown, the metal oxide disc is securely disconnected from the system power by an arc shield. Upon failure, the TPMOV is also equipped with a visual pin indicator as well as a normally open micro-switch, providing remote indication if applicable. TPMOV7 50% more surge capacity, Same footprint The TPMOV7 is rated for 75kA - 8/20µs peak surge current and is available for maximum continuous operating voltages (MCOV) from 150V to 320VAC.

Industry-leading, patented TPMOV technology available in 50kA and 75kA surge capacities; No additional overcurrent protective device (fuses) required; ANSI/UL 1449 4th Edition, Type 1 Component Assembly SPD, File E210793; Built-in visual/remote indication optional; Wave solderable; Consistent footprint with 25–40mm MOVs; RoHS Compliant

Call
No Longer in Production
THERMALLY PROTECT MOV 150SL-HV

THERMALLY PROTECT MOV 150SL-HV

Item #: 150TPMOVSL-HV

Supplier Part #: 150TPMOVSL-HV
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/068bd0896038deadddbe79ab377d10af07200a92.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/068bd0896038deadddbe79ab377d10af07200a92.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c1cf2ff1a674467060fd0135f05d7b039c5085d7.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/c1cf2ff1a674467060fd0135f05d7b039c5085d7.pdf

Mersen’s patented TPMOV technology eliminates common failure modes that occur in the field with standard metal oxide varistors. Internally the TPMOV is comprised of a voltage clamping device and a disconnecting apparatus that monitors the status of the metal oxide disk, making the TPMOV a fail-safe device. In the event of an overvoltage breakdown, the metal oxide disc is securely disconnected from the system power by an arc shield. Upon failure, the TPMOV is also equipped with a visual pin indicator as well as a normally open micro-switch, providing remote indication if applicable. TPMOV7 50% more surge capacity, Same footprint The TPMOV7 is rated for 75kA - 8/20µs peak surge current and is available for maximum continuous operating voltages (MCOV) from 150V to 320VAC.

RoHS Compliant; Consistent footprint with 25–40mm MOVs; Built-in visual/remote indication optional; ANSI/UL 1449 4th Edition, Type 1 Component Assembly SPD, File E210793; Wave solderable; Industry-leading, patented TPMOV technology available in 50kA and 75kA surge capacities; No additional overcurrent protective device (fuses) required

Call
No Longer in Production
MODULAR FBLKM8 STUDPAIR
MODULAR FBLKM8 STUDPAIR
MODULAR FBLKM8 STUDPAIR

MODULAR FBLKM8 STUDPAIR

Item #: 1SCM8

Supplier Part #: 1SCM8
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/475e094405650b3ca6bed35aa71035b0de552773.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/475e094405650b3ca6bed35aa71035b0de552773.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/67562c1e6eabfbd1dba1eb14728f5245941c7d8c.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/67562c1e6eabfbd1dba1eb14728f5245941c7d8c.pdf
Spec Sheet Spec Sheet

Mersen 1SC and 1MSC semiconductor fuse blocks feature modular mounting that offers greater flexibility in adjusting to various fuse lengths. Both stud type and integral box connector versions are offered to allow for user preference of wire terminations. The integral box connector versions also provide for greater heat dissipation. Mounting hardware is supplied with the blocks

UL Recognized Component File E52283; Heat dissipating integral box connector versions; Rugged phenolic insulators; Modular two-piece design; Compact footprint; Stud versions; Accommodates a large range of semiconductor fuses

$27.11 /EA
NOT CURRENTLY IN STOCK
67514-FB 1P 300V-30A AL BOX

67514-FB 1P 300V-30A AL BOX

Item #: 30306T

Supplier Part #: 30306T
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/ca460d31d64e94ad05995cd971e2086caa7e6b0a.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/ca460d31d64e94ad05995cd971e2086caa7e6b0a.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/ed38d8a25eb3fa43f6cacf20f05eede51d4746b1.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/ed38d8a25eb3fa43f6cacf20f05eede51d4746b1.pdf

Mersen Class T fuse blocks accommodate Class T fuses up to 600A. Insulators are either durable, glass-filled polycarbonate (GFPC) or phenolic with verified dielectric strength in excess of 2500V. Mersen is the only manufacturer to offer Class T blocks with copper connectors

Cool running high amperage (100 – 600A) connectors; Full barrier design (30 & 60A) increases pole to pole safety; Unique integral DIN-rail adapters for 600V, 30 & 60A blocks; All fuse blocks meet the requirements of UL 4248; Spring reinforcing standard for all 30 & 60A clips; UL listed, guide IZLT, File E52283; Copper connectors available 30 – 600A; Unique adder-block design (30 & 60A) for design flexibility; UL recognized component guide IZLT2, file E52283; CSA certified class 6225, File 32169; Features high conductivity copper alloy fuse clips

Call
No Longer in Production
67515-FB 2P 300V-30A AL BOX

67515-FB 2P 300V-30A AL BOX

Item #: 30307T

Supplier Part #: 30307T
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/ca460d31d64e94ad05995cd971e2086caa7e6b0a.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/ca460d31d64e94ad05995cd971e2086caa7e6b0a.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/ed38d8a25eb3fa43f6cacf20f05eede51d4746b1.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/ed38d8a25eb3fa43f6cacf20f05eede51d4746b1.pdf

Mersen Class T fuse blocks accommodate Class T fuses up to 600A. Insulators are either durable, glass-filled polycarbonate (GFPC) or phenolic with verified dielectric strength in excess of 2500V. Mersen is the only manufacturer to offer Class T blocks with copper connectors

Copper connectors available 30 – 600A; Spring reinforcing standard for all 30 & 60A clips; Features high conductivity copper alloy fuse clips; All fuse blocks meet the requirements of UL 4248; Full barrier design (30 & 60A) increases pole to pole safety; CSA certified class 6225, File 32169; Unique adder-block design (30 & 60A) for design flexibility; UL listed, guide IZLT, File E52283; Cool running high amperage (100 – 600A) connectors; Unique integral DIN-rail adapters for 600V, 30 & 60A blocks; UL recognized component guide IZLT2, file E52283

$46.88 /EA
NOT CURRENTLY IN STOCK
H+K FUSE BLOCK 250V 30A ADD S

H+K FUSE BLOCK 250V 30A ADD S

Item #: 20310

Supplier Part #: 20310
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/ea7404f8c95194d8f98a390fe2084689a7da0010.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/ea7404f8c95194d8f98a390fe2084689a7da0010.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/ecb4422357604f4a3e297bd76538dd4a6d87bc08.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/ecb4422357604f4a3e297bd76538dd4a6d87bc08.pdf

Mersen Class H, K and R fuse blocks accommodate all Class H, K and R 250 and 600V power fuses. A choice of screw, pressure plate, box and special order stud connectors fit a wide range of stranded or solid copper or aluminum wire. Insulators are either molded glass-filled polycarbonate (GFPC) or phenolic with verified dielectric strength in excess of 2500V. 30, 60 and 100A fuse blocks feature a unique adder block which can be snapped onto 1-, 2- or 3-pole blocks to form multipole segmented blocks of as many poles as desired. All fuse clips are made of high conductivity tinplated copper, with a choice of spring reinforced or nonspring reinforced clips in 30A and 60A. Clips 100A and above are spring reinforced.

CSA certified class 6225, File 32169; UL recognized component guide IZLT2, file E52283; All fuse blocks meet the requirements of UL 4248; UL listed, guide IZLT, File E52283

Call
No Longer in Production
MIDGET FUSEBLOCK 600V 30A 1P S
MIDGET FUSEBLOCK 600V 30A 1P S
MIDGET FUSEBLOCK 600V 30A 1P S

MIDGET FUSEBLOCK 600V 30A 1P S

Item #: 30311

Supplier Part #: 30311
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/b3f4d340e2419657c94f0a11707da8a05b7f418f.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/b3f4d340e2419657c94f0a11707da8a05b7f418f.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/b410689466e2a8ff1cba321b61fedc0f2e5945e0.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/b410689466e2a8ff1cba321b61fedc0f2e5945e0.pdf

Mersen midget fuse blocks accommodate all 30 ampere 1-1/2” x 13/32” midget fuses. Class CC fuse blocks accommodate all 30 ampere Class CC fuses. A choice of box, screw, or pressure-plate connectors fit a wide range of stranded or solid copper wire. Insulators are glassfilled polycarbonate (GFPC) with verified dielectric strength in excess of 2500V. Fuse blocks feature a unique adder block which can be snapped onto 1-, 2- or 3-pole blocks to form multi-pole segmented blocks of as many poles as desired. All fuse clips are made of high conductivity tin-plated copper alloy.

UL listed, guide IZLT, File E52283; CSA certified class 6225, File 32169

Call
No Longer in Production
  • « PREV
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • NEXT »