Search in Category
Fuses
Filter Your Search
Country Of Origin
Voltage
Shop by Category
Loading...
Fuses
Power ProductsFuses
Viewing Page 4 of 18
(172 results)
Sort By:
View:
NH 000 32A 690V AM
Item #:
X227858
Supplier Part #: X227858
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
Dimensions according to DIN 43 620 parts 1 to 4; Non-isolated gripping lugs; VDE 0636 Part 201; Double indicator; Lead free contact blades; IEC 60269-1 and -2; 0% cadmium
$58.48
/EA
NOT CURRENTLY IN STOCK
69 GS 000 PV 032
Item #:
X322043
Supplier Part #: X322043
Brand:
Mersen
The 690/700V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for today's power conversion equipment. These NH style fuse-links are defined as per DIN 43620/00 for a worldwide acceptance into NH modular system fuse-holders, fuse switch disconnectors for direct installation. The Protistor® have been engineered to provide state-of-the-art protection for semiconductors diodes, thyristors, GTO's and IGBT devices. Fuses are assembled with pure silver, die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
gS Class according to IEC 60269-4; No derating in standard NH fusegear; Excellent cycling capability; Multiple body sizes; Reduced power dissipation; CCC GB 1359.4; High widstanding against inrush current and overloads; Highly current limiting; IEC 60269-4 Compliance; Fast acting; Low I²t for improved semiconductor protection; UL/CSA Recognized Component
$109.12
/EA
NOT CURRENTLY IN STOCK
NH 000 35A 400V GG SGL
Item #:
Y223696
Supplier Part #: Y223696
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.
Lead free contact blades; 0% cadmium; Isolated metal gripping lugs (SGL); VDE 0636 Part 201; Dimensions according to DIN 43 620 Parts 1 to 4; IEC 60269-1 and -2; Double indicator
$59.18
/EA
NOT CURRENTLY IN STOCK
NH 000 35A 690V AM
Item #:
Y227859
Supplier Part #: Y227859
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
VDE 0636 Part 201; IEC 60269-1 and -2; Double indicator; 0% cadmium; Dimensions according to DIN 43 620 parts 1 to 4; Lead free contact blades; Non-isolated gripping lugs
$46.67
/EA
NOT CURRENTLY IN STOCK
NH 000 32A 500V GG
Item #:
Z211438
Supplier Part #: Z211438
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Non-isolated gripping lugs; Double indicator; IEC 60269-1 and -2; VDE 0636 Part 201; 0% cadmium; Dimensions according to DIN 43 620 parts 1 to 4; Lead free contact blades
$54.35
/EA
NOT CURRENTLY IN STOCK
NH 000 20A 400V GG SGL
Item #:
V223693
Supplier Part #: V223693
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.
VDE 0636 Part 201; Lead free contact blades; Isolated metal gripping lugs (SGL); Dimensions according to DIN 43 620 Parts 1 to 4; Double indicator; 0% cadmium; IEC 60269-1 and -2
$59.18
/EA
NOT CURRENTLY IN STOCK
69 URB 000 D08 V 160
Item #:
Z330026
Supplier Part #: Z330026
Brand:
Mersen
The 690/700V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for small power conversion equipment. These ultra-fast acting aR fuses have been engineered to provide state-of-the-art protection for semiconductors diodes, thyristors and IGBT devices. They are assembled with die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
Ultra fast acting; UL/CSA Recognized Component; IEC 60269-4 Compliance; AC: UL Guide No. E76491; Superior cycling capability; aR Class according to IEC 60269-4 and VDE 636-23; Very low I²t for improved semiconductor protection
$115.47
/EA
NOT CURRENTLY IN STOCK
NH 000 40A 500V AM
Item #:
V232502
Supplier Part #: V232502
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
Non-isolated gripping lugs; Dimensions according to DIN 43 620 parts 1 to 4; Lead free contact blades; VDE 0636 Part 201; IEC 60269-1 and -2; Double indicator; 0% cadmium
$60.74
/EA
NOT CURRENTLY IN STOCK
5 URB 000 D08 / 350
Item #:
V330114
Supplier Part #: V330114
Brand:
Mersen
The 690/700V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for small power conversion equipment. These ultra-fast acting aR fuses have been engineered to provide state-of-the-art protection for semiconductors diodes, thyristors and IGBT devices. They are assembled with die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
AC: UL Guide No. E76491; IEC 60269-4 Compliance; aR Class according to IEC 60269-4 and VDE 636-23; Very low I²t for improved semiconductor protection; Superior cycling capability; UL/CSA Recognized Component; Ultra fast acting
$120.40
/EA
NOT CURRENTLY IN STOCK
69 URB 000 D08L 100
Item #:
V330183
Supplier Part #: V330183
Brand:
Mersen
The 690/700V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for small power conversion equipment. These ultra-fast acting aR fuses have been engineered to provide state-of-the-art protection for semiconductors diodes, thyristors and IGBT devices. They are assembled with die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
Very low I²t for improved semiconductor protection; UL/CSA Recognized Component; AC: UL Guide No. E76491; Ultra fast acting; IEC 60269-4 Compliance; Superior cycling capability; aR Class according to IEC 60269-4 and VDE 636-23
$108.42
/EA
NOT CURRENTLY IN STOCK
