Browse Categories

Search in Category

Fuses

Search Filters

  • 4300 V x

Filter Your Search

Show Attribute Brand
Hide Attribute Country Of Origin
Hide Attribute Diameter

Shop by Category

Loading...

Fuses

Power Products/Fuses 
Viewing Page 4 of 4 (39 results)
4.3KV, 75AMPS, TYPE 15, MV CAP

4.3KV, 75AMPS, TYPE 15, MV CAP

Item #: A430C75-15

Supplier Part #: A430C75-15
Brand: Mersen

Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products

ANSI C37-41; Blown-fuse indication; Direct mount; High interrupting capacity; Non-venting for silent operation; Current limitation; Clip style mount; Bus mount

$372.40 /EA
NOT CURRENTLY IN STOCK
4.3KV 75 A TYPE 70, MV Cap

4.3KV 75 A TYPE 70, MV Cap

Item #: A430C75-70

Supplier Part #: A430C75-70
Brand: Mersen

Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products

Blown-fuse indication; Non-venting for silent operation; Bus mount; Clip style mount; High interrupting capacity; Current limitation; ANSI C37-41; Direct mount

$359.11 /EA
NOT CURRENTLY IN STOCK
4.3KV, 75 AMPS, TYPE 75, MV CA

4.3KV, 75 AMPS, TYPE 75, MV CA

Item #: A430C75-75

Supplier Part #: A430C75-75
Brand: Mersen

Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products

Clip style mount; Bus mount; Blown-fuse indication; High interrupting capacity; Current limitation; Direct mount; ANSI C37-41; Non-venting for silent operation

$399.14 /EA
NOT CURRENTLY IN STOCK
4.3KV, 80AMPS, TYPE 15, MV CAP

4.3KV, 80AMPS, TYPE 15, MV CAP

Item #: A430C80-15

Supplier Part #: A430C80-15
Brand: Mersen

Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products

Current limitation; Blown-fuse indication; ANSI C37-41; Non-venting for silent operation; Bus mount; High interrupting capacity; Clip style mount; Direct mount

$372.40 /EA
NOT CURRENTLY IN STOCK
4.3KV 80A TYPE 70, MV Cap

4.3KV 80A TYPE 70, MV Cap

Item #: A430C80-70

Supplier Part #: A430C80-70
Brand: Mersen

Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products

Non-venting for silent operation; Clip style mount; Current limitation; Blown-fuse indication; Direct mount; ANSI C37-41; High interrupting capacity; Bus mount

$359.11 /EA
NOT CURRENTLY IN STOCK
4.3KV, 80 AMPS, TYPE 75, MV CA

4.3KV, 80 AMPS, TYPE 75, MV CA

Item #: A430C80-75

Supplier Part #: A430C80-75
Brand: Mersen

Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products

ANSI C37-41; Direct mount; Blown-fuse indication; High interrupting capacity; Clip style mount; Non-venting for silent operation; Current limitation; Bus mount

$399.14 /EA
NOT CURRENTLY IN STOCK
4.3KV, 90AMPS, TYPE 15, MV CAP

4.3KV, 90AMPS, TYPE 15, MV CAP

Item #: A430C90-15

Supplier Part #: A430C90-15
Brand: Mersen

Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products

Blown-fuse indication; Non-venting for silent operation; Current limitation; ANSI C37-41; Direct mount; Clip style mount; High interrupting capacity; Bus mount

$385.71 /EA
NOT CURRENTLY IN STOCK
4.3KV 90A TYPE 70, MV Cap

4.3KV 90A TYPE 70, MV Cap

Item #: A430C90-70

Supplier Part #: A430C90-70
Brand: Mersen

Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products

Bus mount; Blown-fuse indication; Clip style mount; Current limitation; Non-venting for silent operation; High interrupting capacity; Direct mount; ANSI C37-41

$372.40 /EA
NOT CURRENTLY IN STOCK
4.3KV, 90 AMPS, TYPE 75, MV CA

4.3KV, 90 AMPS, TYPE 75, MV CA

Item #: A430C90-75

Supplier Part #: A430C90-75
Brand: Mersen

Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products

Current limitation; Bus mount; High interrupting capacity; ANSI C37-41; Blown-fuse indication; Direct mount; Clip style mount; Non-venting for silent operation

$412.22 /EA
NOT CURRENTLY IN STOCK
  • « PREV
  • 1
  • 2
  • 3
  • 4