Browse Categories

Search in Category

Fuses

Search Filters

  • Finland x

Filter Your Search

Show Attribute Brand
Hide Attribute Voltage

Shop by Category

Fuses

Power Products/Fuses 
Viewing Page 3 of 8 (72 results)
Sort By:
View:
SWITCH.FUS 600A J R 4+0 POS.

SWITCH.FUS 600A J R 4+0 POS.

Item #: M600J40

Supplier Part #: M600J40
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/902d7763a0b57a4d0237316c10cbb3e2a4bdc497.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/902d7763a0b57a4d0237316c10cbb3e2a4bdc497.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/d4f2fe48c7e6dd9ff989cb9c36ee5a465517d410.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/d4f2fe48c7e6dd9ff989cb9c36ee5a465517d410.pdf

Mersen’s fusible disconnect switches are listed to UL 98 and bear the CE mark conforming to IEC 60947-3. They are “service entrance” devices capable of fully rated load-break and load-make. While longterm safety, reliability, and functionality are always paramount in the design of our products, these switches are also engineered to have the smallest footprint. The modular design allows placement of the handle anywhere amongst the poles. The fuse doors cannot open when the switch is in the “ON” position, and all switches are double-break, which isolates both fuse clips from voltage during fuse replacement. The switches’ “Test” position allows actuation of the auxiliary contacts without main power. Power taps enable energizing a CPT or surge device without the need for a separate terminal block. A wide range of ergonomic handles and accessories is available.

Fuse monitoring; Adjustable shaft depth; IEC 60947-3; All UL Fusible Disconnect Switches meet UL & CSA requirements; UL listed guide WHTY, File E191605 for UL 98 (ratings from 30A to 1200A); Interlocked fuse doors; Power taps; Multiple Configurations; Double break, isolating live and load side of fuse

$6,249.84 /EA
NOT CURRENTLY IN STOCK
UL98 SWITCH 600A 3P 1+2 POS.

UL98 SWITCH 600A 3P 1+2 POS.

Item #: M600U12

Supplier Part #: M600U12
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/25c6d5bbf72a9c71e0cdb1387cdd11373b14f3a9.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/25c6d5bbf72a9c71e0cdb1387cdd11373b14f3a9.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/3ecb1ada1bcc947ca8596cdb09739f39c7fbadb1.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/3ecb1ada1bcc947ca8596cdb09739f39c7fbadb1.pdf

Mersen disconnect switches are extremely durable and versatile. These heavy-duty switches are designed with the most up-to-date disconnect switch technology available. Designed to suit the UL98 standard, the switch gives you a product that makes and breaks power circuits on load. The switches are tested and approved for use in demanding applications, such as Service Entrance.

Internally mounted auxiliary contacts; Flexible mounting; UL listed guide WHTY, File E191605 for UL 98 (ratings from 30 A to 1200 A); All UL switches meet the requirements of UL and CSA; Flange mounting accessories; Most compact size; Adjustable shaft depth; Front or side operation; Service entrance rated; IEC 60947-3

$2,599.37 /EA
NOT CURRENTLY IN STOCK
Switch.fus 60A J 1+2 pos.

Switch.fus 60A J 1+2 pos.

Item #: M60J12

Supplier Part #: M60J12
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/902d7763a0b57a4d0237316c10cbb3e2a4bdc497.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/902d7763a0b57a4d0237316c10cbb3e2a4bdc497.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/d4f2fe48c7e6dd9ff989cb9c36ee5a465517d410.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/d4f2fe48c7e6dd9ff989cb9c36ee5a465517d410.pdf

Mersen’s fusible disconnect switches are listed to UL 98 and bear the CE mark conforming to IEC 60947-3. They are “service entrance” devices capable of fully rated load-break and load-make. While longterm safety, reliability, and functionality are always paramount in the design of our products, these switches are also engineered to have the smallest footprint. The modular design allows placement of the handle anywhere amongst the poles. The fuse doors cannot open when the switch is in the “ON” position, and all switches are double-break, which isolates both fuse clips from voltage during fuse replacement. The switches’ “Test” position allows actuation of the auxiliary contacts without main power. Power taps enable energizing a CPT or surge device without the need for a separate terminal block. A wide range of ergonomic handles and accessories is available.

Fuse monitoring; Power taps; All UL Fusible Disconnect Switches meet UL & CSA requirements; Double break, isolating live and load side of fuse; UL listed guide WHTY, File E191605 for UL 98 (ratings from 30A to 1200A); Adjustable shaft depth; Interlocked fuse doors; Multiple Configurations; IEC 60947-3

$444.66 /EA
NOT CURRENTLY IN STOCK
SWITCH.FUS 60A J 2+2 POS.
SWITCH.FUS 60A J 2+2 POS.
SWITCH.FUS 60A J 2+2 POS.

SWITCH.FUS 60A J 2+2 POS.

Item #: M60J22

Supplier Part #: M60J22
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/902d7763a0b57a4d0237316c10cbb3e2a4bdc497.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/902d7763a0b57a4d0237316c10cbb3e2a4bdc497.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/d4f2fe48c7e6dd9ff989cb9c36ee5a465517d410.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/d4f2fe48c7e6dd9ff989cb9c36ee5a465517d410.pdf
Spec Sheet Spec Sheet

Mersen’s fusible disconnect switches are listed to UL 98 and bear the CE mark conforming to IEC 60947-3. They are “service entrance” devices capable of fully rated load-break and load-make. While longterm safety, reliability, and functionality are always paramount in the design of our products, these switches are also engineered to have the smallest footprint. The modular design allows placement of the handle anywhere amongst the poles. The fuse doors cannot open when the switch is in the “ON” position, and all switches are double-break, which isolates both fuse clips from voltage during fuse replacement. The switches’ “Test” position allows actuation of the auxiliary contacts without main power. Power taps enable energizing a CPT or surge device without the need for a separate terminal block. A wide range of ergonomic handles and accessories is available.

Adjustable shaft depth; IEC 60947-3; Fuse monitoring; UL listed guide WHTY, File E191605 for UL 98 (ratings from 30A to 1200A); Power taps; Double break, isolating live and load side of fuse; Interlocked fuse doors; Multiple Configurations; All UL Fusible Disconnect Switches meet UL & CSA requirements

$666.99 /EA
NOT CURRENTLY IN STOCK
SWITCH.FUS 60A J 2+1+N POS.

SWITCH.FUS 60A J 2+1+N POS.

Item #: M60J22N

Supplier Part #: M60J22N
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/902d7763a0b57a4d0237316c10cbb3e2a4bdc497.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/902d7763a0b57a4d0237316c10cbb3e2a4bdc497.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/d4f2fe48c7e6dd9ff989cb9c36ee5a465517d410.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/d4f2fe48c7e6dd9ff989cb9c36ee5a465517d410.pdf

Mersen’s fusible disconnect switches are listed to UL 98 and bear the CE mark conforming to IEC 60947-3. They are “service entrance” devices capable of fully rated load-break and load-make. While longterm safety, reliability, and functionality are always paramount in the design of our products, these switches are also engineered to have the smallest footprint. The modular design allows placement of the handle anywhere amongst the poles. The fuse doors cannot open when the switch is in the “ON” position, and all switches are double-break, which isolates both fuse clips from voltage during fuse replacement. The switches’ “Test” position allows actuation of the auxiliary contacts without main power. Power taps enable energizing a CPT or surge device without the need for a separate terminal block. A wide range of ergonomic handles and accessories is available.

IEC 60947-3; Double break, isolating live and load side of fuse; Fuse monitoring; Adjustable shaft depth; Interlocked fuse doors; All UL Fusible Disconnect Switches meet UL & CSA requirements; Multiple Configurations; UL listed guide WHTY, File E191605 for UL 98 (ratings from 30A to 1200A); Power taps

$666.99 /EA
NOT CURRENTLY IN STOCK
Switch.fus 60A J R side oper.

Switch.fus 60A J R side oper.

Item #: M60J30S

Supplier Part #: M60J30S
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/902d7763a0b57a4d0237316c10cbb3e2a4bdc497.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/902d7763a0b57a4d0237316c10cbb3e2a4bdc497.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/d4f2fe48c7e6dd9ff989cb9c36ee5a465517d410.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/d4f2fe48c7e6dd9ff989cb9c36ee5a465517d410.pdf

Mersen’s fusible disconnect switches are listed to UL 98 and bear the CE mark conforming to IEC 60947-3. They are “service entrance” devices capable of fully rated load-break and load-make. While longterm safety, reliability, and functionality are always paramount in the design of our products, these switches are also engineered to have the smallest footprint. The modular design allows placement of the handle anywhere amongst the poles. The fuse doors cannot open when the switch is in the “ON” position, and all switches are double-break, which isolates both fuse clips from voltage during fuse replacement. The switches’ “Test” position allows actuation of the auxiliary contacts without main power. Power taps enable energizing a CPT or surge device without the need for a separate terminal block. A wide range of ergonomic handles and accessories is available.

Fuse monitoring; Power taps; Interlocked fuse doors; Multiple Configurations; Adjustable shaft depth; UL listed guide WHTY, File E191605 for UL 98 (ratings from 30A to 1200A); Double break, isolating live and load side of fuse; All UL Fusible Disconnect Switches meet UL & CSA requirements; IEC 60947-3

$555.41 /EA
NOT CURRENTLY IN STOCK
SWITCH.FUS 60A J R 4+0 POS.

SWITCH.FUS 60A J R 4+0 POS.

Item #: M60J40

Supplier Part #: M60J40
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/902d7763a0b57a4d0237316c10cbb3e2a4bdc497.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/902d7763a0b57a4d0237316c10cbb3e2a4bdc497.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/d4f2fe48c7e6dd9ff989cb9c36ee5a465517d410.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/d4f2fe48c7e6dd9ff989cb9c36ee5a465517d410.pdf

Mersen’s fusible disconnect switches are listed to UL 98 and bear the CE mark conforming to IEC 60947-3. They are “service entrance” devices capable of fully rated load-break and load-make. While longterm safety, reliability, and functionality are always paramount in the design of our products, these switches are also engineered to have the smallest footprint. The modular design allows placement of the handle anywhere amongst the poles. The fuse doors cannot open when the switch is in the “ON” position, and all switches are double-break, which isolates both fuse clips from voltage during fuse replacement. The switches’ “Test” position allows actuation of the auxiliary contacts without main power. Power taps enable energizing a CPT or surge device without the need for a separate terminal block. A wide range of ergonomic handles and accessories is available.

Power taps; Adjustable shaft depth; Interlocked fuse doors; Fuse monitoring; UL listed guide WHTY, File E191605 for UL 98 (ratings from 30A to 1200A); IEC 60947-3; Double break, isolating live and load side of fuse; Multiple Configurations; All UL Fusible Disconnect Switches meet UL & CSA requirements

$666.99 /EA
NOT CURRENTLY IN STOCK
IEC UL508 Switch 63A 3p DM

IEC UL508 Switch 63A 3p DM

Item #: M633DM

Supplier Part #: M633DM
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/ee5ef773c5d77df29ac2210892b24dca45335ea6.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/ee5ef773c5d77df29ac2210892b24dca45335ea6.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/fc1507c7ab1be3d322ca42ec22f3d1760a9c2877.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/fc1507c7ab1be3d322ca42ec22f3d1760a9c2877.pdf

The M-series Load Break Switch is the most compact industrial-grade switch on the market. Capable of making or breaking loads up to 600V (UL), it is suitable as a motor disconnect. Extremely compact and robust, these switches have a variety of mounting options including DIN-rail, base, or door-mounting. A wide assortment of handles, shafts and accessories is available to accommodate any installation requirement.

Choice of handles and shafts; Padlockable; Compact; Double-break, silver-plated, contacts; IEC 60947-3; UL 508 listed E196672; DIN-rail, base, or door mounting; Side-mount auxiliary contacts and additional poles; Robust

$249.96 /EA
NOT CURRENTLY IN STOCK
SWITCH.FUS 800A L 1+2 POS.

SWITCH.FUS 800A L 1+2 POS.

Item #: M800L12

Supplier Part #: M800L12
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/902d7763a0b57a4d0237316c10cbb3e2a4bdc497.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/902d7763a0b57a4d0237316c10cbb3e2a4bdc497.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/d4f2fe48c7e6dd9ff989cb9c36ee5a465517d410.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/d4f2fe48c7e6dd9ff989cb9c36ee5a465517d410.pdf

Mersen’s fusible disconnect switches are listed to UL 98 and bear the CE mark conforming to IEC 60947-3. They are “service entrance” devices capable of fully rated load-break and load-make. While longterm safety, reliability, and functionality are always paramount in the design of our products, these switches are also engineered to have the smallest footprint. The modular design allows placement of the handle anywhere amongst the poles. The fuse doors cannot open when the switch is in the “ON” position, and all switches are double-break, which isolates both fuse clips from voltage during fuse replacement. The switches’ “Test” position allows actuation of the auxiliary contacts without main power. Power taps enable energizing a CPT or surge device without the need for a separate terminal block. A wide range of ergonomic handles and accessories is available.

Adjustable shaft depth; Interlocked fuse doors; Power taps; All UL Fusible Disconnect Switches meet UL & CSA requirements; Multiple Configurations; Fuse monitoring; UL listed guide WHTY, File E191605 for UL 98 (ratings from 30A to 1200A); Double break, isolating live and load side of fuse; IEC 60947-3

$5,758.01 /EA
NOT CURRENTLY IN STOCK
Switch.fus 800A L R 3+0 pos.

Switch.fus 800A L R 3+0 pos.

Item #: M800L30

Supplier Part #: M800L30
Brand: Mersen
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/902d7763a0b57a4d0237316c10cbb3e2a4bdc497.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/902d7763a0b57a4d0237316c10cbb3e2a4bdc497.pdf
https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/d4f2fe48c7e6dd9ff989cb9c36ee5a465517d410.pdf https://media.distributordatasolutions.com/xlsx_mersen/2021q1/documents/d4f2fe48c7e6dd9ff989cb9c36ee5a465517d410.pdf

Mersen’s fusible disconnect switches are listed to UL 98 and bear the CE mark conforming to IEC 60947-3. They are “service entrance” devices capable of fully rated load-break and load-make. While longterm safety, reliability, and functionality are always paramount in the design of our products, these switches are also engineered to have the smallest footprint. The modular design allows placement of the handle anywhere amongst the poles. The fuse doors cannot open when the switch is in the “ON” position, and all switches are double-break, which isolates both fuse clips from voltage during fuse replacement. The switches’ “Test” position allows actuation of the auxiliary contacts without main power. Power taps enable energizing a CPT or surge device without the need for a separate terminal block. A wide range of ergonomic handles and accessories is available.

Adjustable shaft depth; Fuse monitoring; Multiple Configurations; IEC 60947-3; Interlocked fuse doors; All UL Fusible Disconnect Switches meet UL & CSA requirements; Power taps; Double break, isolating live and load side of fuse; UL listed guide WHTY, File E191605 for UL 98 (ratings from 30A to 1200A)

$5,151.91 /EA
NOT CURRENTLY IN STOCK
  • « PREV
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • NEXT »