Browse Categories

Search in Category

Fuses

Search Filters

  • 400-440 V x

Filter Your Search

Show Attribute Brand

Shop by Category

Loading...

Fuses

Power Products/Fuses 
Viewing Page 2 of 2 (15 results)
D02-SICH.SOCKEL 1POL. KAPPE

D02-SICH.SOCKEL 1POL. KAPPE

Item #: Q215041

Supplier Part #: Q215041
Brand: Mersen

The D0 fuse-system is installed in low voltage ditribution units, where fuse-links are accessible to non trained persons and can also be replaced by them. This system is the newest generation of screw fuse-system in the german DIN standard and is designed for 400VAC/250VDC networks. The D0 fuse-bases are available in the sizes D01, D02 and D03. D0 fuse-bases are used in combination with D0 fuse-links for the protection of cables and power lines. D0 fuse-links limit and cut-off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. They also protect equipments and installations against dynamic effects of high short circuit currents.

Clear indication of operation condition due coloured indicator un top contact; Insulated body suitable for high mechanical and thermal impacts; Low power dissipation; Optimized size; Top and bottom contacts made of nickel plated copper alloy; Resistant to aging; Safe cut-off short circuits and over currents due to special design of fuse element

Call
NOT CURRENTLY IN STOCK
D02-SICH.SOCKEL 1POL. 440V

D02-SICH.SOCKEL 1POL. 440V

Item #: C216064

Supplier Part #: C216064
Brand: Mersen

The D0 fuse-system is installed in low voltage ditribution units, where fuse-links are accessible to non trained persons and can also be replaced by them. This system is the newest generation of screw fuse-system in the german DIN standard and is designed for 400VAC/250VDC networks. The D0 fuse-bases are available in the sizes D01, D02 and D03. D0 fuse-bases are used in combination with D0 fuse-links for the protection of cables and power lines. D0 fuse-links limit and cut-off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. They also protect equipments and installations against dynamic effects of high short circuit currents.

Clear indication of operation condition due coloured indicator un top contact; Optimized size; Top and bottom contacts made of nickel plated copper alloy; Safe cut-off short circuits and over currents due to special design of fuse element; Insulated body suitable for high mechanical and thermal impacts; Resistant to aging; Low power dissipation

Call
NOT CURRENTLY IN STOCK
D01/D02 ABDECKUNG 1-POL.

D01/D02 ABDECKUNG 1-POL.

Item #: V200670

Supplier Part #: V200670
Brand: Mersen

The D0 fuse-system is installed in low voltage ditribution units, where fuse-links are accessible to non trained persons and can also be replaced by them. This system is the newest generation of screw fuse-system in the german DIN standard and is designed for 400VAC/250VDC networks. The D0 fuse-bases are available in the sizes D01, D02 and D03. D0 fuse-bases are used in combination with D0 fuse-links for the protection of cables and power lines. D0 fuse-links limit and cut-off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. They also protect equipments and installations against dynamic effects of high short circuit currents.

Insulated body suitable for high mechanical and thermal impacts; Optimized size; Resistant to aging; Safe cut-off short circuits and over currents due to special design of fuse element; Low power dissipation; Top and bottom contacts made of nickel plated copper alloy; Clear indication of operation condition due coloured indicator un top contact

$7.47 /EA
NOT CURRENTLY IN STOCK
D01/D02 ABDECKKAPPE 1-POL.

D01/D02 ABDECKKAPPE 1-POL.

Item #: X201730

Supplier Part #: X201730
Brand: Mersen

The D0 fuse-system is installed in low voltage ditribution units, where fuse-links are accessible to non trained persons and can also be replaced by them. This system is the newest generation of screw fuse-system in the german DIN standard and is designed for 400VAC/250VDC networks. The D0 fuse-bases are available in the sizes D01, D02 and D03. D0 fuse-bases are used in combination with D0 fuse-links for the protection of cables and power lines. D0 fuse-links limit and cut-off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. They also protect equipments and installations against dynamic effects of high short circuit currents.

Top and bottom contacts made of nickel plated copper alloy; Safe cut-off short circuits and over currents due to special design of fuse element; Optimized size; Low power dissipation; Insulated body suitable for high mechanical and thermal impacts; Clear indication of operation condition due coloured indicator un top contact; Resistant to aging

Call
NOT CURRENTLY IN STOCK
D02-SICH.SOCKEL 3POL. ABD.

D02-SICH.SOCKEL 3POL. ABD.

Item #: K213518

Supplier Part #: K213518
Brand: Mersen

The D0 fuse-system is installed in low voltage ditribution units, where fuse-links are accessible to non trained persons and can also be replaced by them. This system is the newest generation of screw fuse-system in the german DIN standard and is designed for 400VAC/250VDC networks. The D0 fuse-bases are available in the sizes D01, D02 and D03. D0 fuse-bases are used in combination with D0 fuse-links for the protection of cables and power lines. D0 fuse-links limit and cut-off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. They also protect equipments and installations against dynamic effects of high short circuit currents.

Insulated body suitable for high mechanical and thermal impacts; Resistant to aging; Clear indication of operation condition due coloured indicator un top contact; Safe cut-off short circuits and over currents due to special design of fuse element; Low power dissipation; Top and bottom contacts made of nickel plated copper alloy; Optimized size

$218.35 /EA
NOT CURRENTLY IN STOCK
  • « PREV
  • 1
  • 2