Search in Category
Fuses
Search Filters
-
2500 V x
Filter Your Search
Brand
Diameter
Shop by Category
Loading...
Fuses
Power ProductsFuses
Viewing Page 2 of 2
(13 results)
2.5KV, 75 AMPS, TYPE 10, MV CA
Item #:
A250C75-10
Supplier Part #: A250C75-10
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products
Blown-fuse indication; ANSI C37-41; Current limitation; Direct mount; Non-venting for silent operation; High interrupting capacity; Clip style mount; Bus mount
$335.87
/EA
NOT CURRENTLY IN STOCK
2.5KV, 75 AMPS, TYPE 30, MV CA
Item #:
A250C75-30
Supplier Part #: A250C75-30
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products
Blown-fuse indication; Direct mount; Non-venting for silent operation; High interrupting capacity; Bus mount; Current limitation; Clip style mount; ANSI C37-41
$335.87
/EA
NOT CURRENTLY IN STOCK
2.5KV, 80 AMPS, TYPE 30, MV CA
Item #:
A250C80-30
Supplier Part #: A250C80-30
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products
Clip style mount; High interrupting capacity; ANSI C37-41; Direct mount; Current limitation; Non-venting for silent operation; Blown-fuse indication; Bus mount
$335.87
/EA
NOT CURRENTLY IN STOCK
