Search in Category
Fuses
Search Filters
-
1.1 in x
Filter Your Search
Brand
Voltage
Shop by Category
Loading...
Fuses
Power ProductsFuses
Viewing Page 2 of 3
(24 results)
1.5KV, 75 AMPS, TYPE 20, MV CA
Item #:
A150C75-20
Supplier Part #: A150C75-20
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are current-limiting operating without noise or discharge and are designed to be used indoors or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the usage of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost and space saving solutions and a large choice of equivalent products to users.
High interrupting capacity; Blown fuse indicator; Clip style mounting; ANSI C37-41; Non-venting for silent operation; Bus mounting; Current-limiting; Direct mounting
$319.87
/EA
NOT CURRENTLY IN STOCK
1.5KV, 75 AMPS, TYPE 50, MV CA
Item #:
A150C75-50
Supplier Part #: A150C75-50
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are current-limiting operating without noise or discharge and are designed to be used indoors or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the usage of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost and space saving solutions and a large choice of equivalent products to users.
Blown fuse indicator; Non-venting for silent operation; Clip style mounting; Bus mounting; Current-limiting; Direct mounting; ANSI C37-41; High interrupting capacity
$319.87
/EA
NOT CURRENTLY IN STOCK
1.5KV, 90 AMPS, TYPE 20, MV CA
Item #:
A150C90-20
Supplier Part #: A150C90-20
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are current-limiting operating without noise or discharge and are designed to be used indoors or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the usage of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost and space saving solutions and a large choice of equivalent products to users.
Bus mounting; High interrupting capacity; Blown fuse indicator; Clip style mounting; Non-venting for silent operation; ANSI C37-41; Direct mounting; Current-limiting
$319.87
/EA
NOT CURRENTLY IN STOCK
135KV, 90 AMPS, TYPE 50, MV CA
Item #:
A150C90-50
Supplier Part #: A150C90-50
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are current-limiting operating without noise or discharge and are designed to be used indoors or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the usage of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost and space saving solutions and a large choice of equivalent products to users.
Non-venting for silent operation; Direct mounting; High interrupting capacity; Clip style mounting; Blown fuse indicator; Current-limiting; Bus mounting; ANSI C37-41
$319.87
/EA
NOT CURRENTLY IN STOCK
2.5KV, 100AMPS, TYPE 30, MV CA
Item #:
A250C100-30
Supplier Part #: A250C100-30
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products
Direct mount; Clip style mount; High interrupting capacity; Bus mount; ANSI C37-41; Non-venting for silent operation; Blown-fuse indication; Current limitation
$335.87
/EA
NOT CURRENTLY IN STOCK
2.5KV, 110 AMPS, TYPE 30,MV CA
Item #:
A250C110-30
Supplier Part #: A250C110-30
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products
Blown-fuse indication; ANSI C37-41; Direct mount; Bus mount; Clip style mount; Current limitation; Non-venting for silent operation; High interrupting capacity
$335.87
/EA
NOT CURRENTLY IN STOCK
2.5KV, 125AMPS, TYPE 30, MV CA
Item #:
A250C125-30
Supplier Part #: A250C125-30
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products
Clip style mount; High interrupting capacity; Non-venting for silent operation; Current limitation; Blown-fuse indication; Bus mount; ANSI C37-41; Direct mount
$392.62
/EA
NOT CURRENTLY IN STOCK
2.5KV, 25AMPS, TYPE 30, MV CAP
Item #:
A250C25-30
Supplier Part #: A250C25-30
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products
Clip style mount; Bus mount; Non-venting for silent operation; High interrupting capacity; Blown-fuse indication; ANSI C37-41; Current limitation; Direct mount
$335.87
/EA
NOT CURRENTLY IN STOCK
2.5KV, 50 AMPS, TYPE 30, MV CA
Item #:
A250C50-30
Supplier Part #: A250C50-30
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products
Clip style mount; ANSI C37-41; Direct mount; Current limitation; Blown-fuse indication; High interrupting capacity; Non-venting for silent operation; Bus mount
$335.87
/EA
NOT CURRENTLY IN STOCK
2.5KV, 65 AMPS, TYPE 30, MV CA
Item #:
A250C65-30
Supplier Part #: A250C65-30
Brand:
Mersen
Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products
High interrupting capacity; ANSI C37-41; Blown-fuse indication; Current limitation; Clip style mount; Bus mount; Direct mount; Non-venting for silent operation
$335.87
/EA
NOT CURRENTLY IN STOCK
