Browse Categories

Search in Category

Fuses

Search Filters

  • 0.82 in x

Filter Your Search

Show Attribute Brand
Hide Attribute Country Of Origin
Hide Attribute Frequency
Hide Attribute Length

Shop by Category

Loading...

Fuses

Power Products/Fuses 
Viewing Page 2 of 3 (25 results)
600V 90A CLASS T - BULK

600V 90A CLASS T - BULK

Item #: A6T90-BPK

Supplier Part #: A6T90-BPK
Brand: Mersen

Fast-acting A6T Class T fuses combine two highly desirable features - high current-limitation and a small physical size. Their unique dimensions prevent the substitution of other fuses with lower voltage ratings or current-limiting capability. These fuses have glass melamine bodies for superior dimensional stability and catalog numbers stamped into the blades for permanent identification.

Load centers; Blade-stamped catalog numbers for permanent identification; CSA certified to standard C22.2 no. 248.15; Panelboards; DC listed to UL standard 248; Extremely current-limiting for low peak let-thru current; Metering centers; Unique dimensions prevent replacement by other fuse classes; Small physical size for greater design flexibility; Switchboards; Circuit breakers; UL listed to standard 248-15 File E2137

$189.45 /EA
NOT CURRENTLY IN STOCK
14119-FUSE,FORM 101

14119-FUSE,FORM 101

Item #: A50QS50-4Y

Supplier Part #: A50QS50-4Y
Brand: Mersen

A50QS Amp-Trap® Form 101 fuses grew out of the need to improve the overall performance of semiconductor fuses in response to new equipment requirements. The A50QS encompasses the best protection features – lower I2t to provide better protection for equipment, longer life when subjected to cyclic loading and lower watts loss. A50QS is today’s best choice for the protection of dynamic solid state equipment such as motor drives, inverters, UPS, etc.

Low watts loss for cooler operation; State-of-the-art protection for 500V equipment; UL recognized component UL File 60314; Superior cycling ability gives an equipment design advantage; Ultra compact sizes allow down-sizing of existing equipment; AC: UL guide no. JFHR2; CSA Certified LR12636; Lowest I2t for greatest protection of semiconductor circuits; DC Tested to UL standard 198L parameters (70-1200A)

$291.44 /EA
NOT CURRENTLY IN STOCK
MOV FUSE 480V SR100KA

MOV FUSE 480V SR100KA

Item #: VSP100

Supplier Part #: VSP100
Brand: Mersen

Mersen surge suppression fuses are specially designed to address the protection of SPD systems. Our surge suppression fuses have been specially designed to withstand 8/20 µSec surge pulses without opening, allowing the SPD system to react to the surge. All surge suppression fuses have a 8/20 µSec surge rating, not a continuous current rating. Under AC short circuit conditions these surge suppression fuses are very current limiting.

ANSI/UL 248 Special Purpose MOV Fuse, File E60314; VSP fuses rated 600VAC, 200kA I.R.; Various mounting configurations ferrules, blade, bolt-in, PC board mount; Surge ratings of 5-100kA 8/20 µSec capacity

$71.85 /EA
NOT CURRENTLY IN STOCK
MOV FUSE 480V SR100KA-2

MOV FUSE 480V SR100KA-2

Item #: VSP100-2

Supplier Part #: VSP100-2
Brand: Mersen

Mersen surge suppression fuses are specially designed to address the protection of SPD systems. Our surge suppression fuses have been specially designed to withstand 8/20 µSec surge pulses without opening, allowing the SPD system to react to the surge. All surge suppression fuses have a 8/20 µSec surge rating, not a continuous current rating. Under AC short circuit conditions these surge suppression fuses are very current limiting.

Various mounting configurations ferrules, blade, bolt-in, PC board mount; VSP fuses rated 600VAC, 200kA I.R.; ANSI/UL 248 Special Purpose MOV Fuse, File E60314; Surge ratings of 5-100kA 8/20 µSec capacity

$69.01 /EA
NOT CURRENTLY IN STOCK
MOV FUSE 600V SR30KA

MOV FUSE 600V SR30KA

Item #: VSP30

Supplier Part #: VSP30
Brand: Mersen

Mersen surge suppression fuses are specially designed to address the protection of SPD systems. Our surge suppression fuses have been specially designed to withstand 8/20 µSec surge pulses without opening, allowing the SPD system to react to the surge. All surge suppression fuses have a 8/20 µSec surge rating, not a continuous current rating. Under AC short circuit conditions these surge suppression fuses are very current limiting.

VSP fuses rated 600VAC, 200kA I.R.; ANSI/UL 248 Special Purpose MOV Fuse, File E60314; Surge ratings of 5-100kA 8/20 µSec capacity; Various mounting configurations ferrules, blade, bolt-in, PC board mount

$66.57 /EA
NOT CURRENTLY IN STOCK
MOV FUSE 600V SR30KA-2

MOV FUSE 600V SR30KA-2

Item #: VSP30-2

Supplier Part #: VSP30-2
Brand: Mersen

Mersen surge suppression fuses are specially designed to address the protection of SPD systems. Our surge suppression fuses have been specially designed to withstand 8/20 µSec surge pulses without opening, allowing the SPD system to react to the surge. All surge suppression fuses have a 8/20 µSec surge rating, not a continuous current rating. Under AC short circuit conditions these surge suppression fuses are very current limiting.

Surge ratings of 5-100kA 8/20 µSec capacity; Various mounting configurations ferrules, blade, bolt-in, PC board mount; ANSI/UL 248 Special Purpose MOV Fuse, File E60314; VSP fuses rated 600VAC, 200kA I.R.

$60.94 /EA
NOT CURRENTLY IN STOCK
MOV FUSE 600V SR40KA

MOV FUSE 600V SR40KA

Item #: VSP40

Supplier Part #: VSP40
Brand: Mersen

Mersen surge suppression fuses are specially designed to address the protection of SPD systems. Our surge suppression fuses have been specially designed to withstand 8/20 µSec surge pulses without opening, allowing the SPD system to react to the surge. All surge suppression fuses have a 8/20 µSec surge rating, not a continuous current rating. Under AC short circuit conditions these surge suppression fuses are very current limiting.

Surge ratings of 5-100kA 8/20 µSec capacity; Various mounting configurations ferrules, blade, bolt-in, PC board mount; ANSI/UL 248 Special Purpose MOV Fuse, File E60314; VSP fuses rated 600VAC, 200kA I.R.

$60.46 /EA
NOT CURRENTLY IN STOCK

MOV FUSE 600V SR50KA-2

Item #: VSP50-2

Supplier Part #: VSP50-2
Brand: Mersen

Mersen surge suppression fuses are specially designed to address the protection of SPD systems. Our surge suppression fuses have been specially designed to withstand 8/20 µSec surge pulses without opening, allowing the SPD system to react to the surge. All surge suppression fuses have a 8/20 µSec surge rating, not a continuous current rating. Under AC short circuit conditions these surge suppression fuses are very current limiting.

VSP fuses rated 600VAC, 200kA I.R.; ANSI/UL 248 Special Purpose MOV Fuse, File E60314; Various mounting configurations ferrules, blade, bolt-in, PC board mount; Surge ratings of 5-100kA 8/20 µSec capacity

$68.26 /EA
NOT CURRENTLY IN STOCK
MOV FUSE 600V SR60KA

MOV FUSE 600V SR60KA

Item #: VSP60

Supplier Part #: VSP60
Brand: Mersen

Mersen surge suppression fuses are specially designed to address the protection of SPD systems. Our surge suppression fuses have been specially designed to withstand 8/20 µSec surge pulses without opening, allowing the SPD system to react to the surge. All surge suppression fuses have a 8/20 µSec surge rating, not a continuous current rating. Under AC short circuit conditions these surge suppression fuses are very current limiting.

Various mounting configurations ferrules, blade, bolt-in, PC board mount; ANSI/UL 248 Special Purpose MOV Fuse, File E60314; Surge ratings of 5-100kA 8/20 µSec capacity; VSP fuses rated 600VAC, 200kA I.R.

$60.46 /EA
NOT CURRENTLY IN STOCK
MOV FUSE 600V SR60KA-2

MOV FUSE 600V SR60KA-2

Item #: VSP60-2

Supplier Part #: VSP60-2
Brand: Mersen

Mersen surge suppression fuses are specially designed to address the protection of SPD systems. Our surge suppression fuses have been specially designed to withstand 8/20 µSec surge pulses without opening, allowing the SPD system to react to the surge. All surge suppression fuses have a 8/20 µSec surge rating, not a continuous current rating. Under AC short circuit conditions these surge suppression fuses are very current limiting.

VSP fuses rated 600VAC, 200kA I.R.; Surge ratings of 5-100kA 8/20 µSec capacity; Various mounting configurations ferrules, blade, bolt-in, PC board mount; ANSI/UL 248 Special Purpose MOV Fuse, File E60314

$57.51 /EA
NOT CURRENTLY IN STOCK
  • « PREV
  • 1
  • 2
  • 3
  • NEXT »