Search in Category
Fuses
Filter Your Search
Diameter
Fuse Size
Shop by Category
Loading...
Fuses
Power ProductsFuses
Viewing Page 1 of 61
(602 results)
NH 00 35A 690V GG
Item #:
W228455
Supplier Part #: W228455
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Lead free contact blades; Dimensions according to DIN 43 620 parts 1 to 4; 0% cadmium; VDE 0636 Part 201; Double indicator; IEC 60269-1 and -2; Non-isolated gripping lugs
$118.62
/EA
NOT CURRENTLY IN STOCK
D02-SICH.EINS. 440V 35A GL-GG
Item #:
C214684
Supplier Part #: C214684
Brand:
Mersen
The D0 fuse-system is installed in low voltage distribution units, where fuse-links are accessible to non trained persons and can also be replaced by them. The system is the most modern of the screw systems and designed for 400VAC/250VDC networks. The D0 fuse range comprises the standardized fuse sizes D01, D02 and D03. The range of applications for D0 fuse-links for general application is the protection of cables and power lines. They limit and cut off unacceptable overcurrents and short circuit currents up to their nominal breaking capacity. D0 fuse-links "gG" also protect equipments and installations against dynamic effects of high short circuit currents.
Optimized size; Top and bottom contacts made of nickel plated or silver plated copper alloy; DIN VDE 0636-3; Insulated body suitable for high mechanical and thermal impacts; Low power dissipation; Safe cut-off short circuits and over currents due to special design of fuse element; Resistant to aging; Clear indication of operation condition due to coloured indicator un top contact
$65.71
/EA
NOT CURRENTLY IN STOCK
FUS.HICAP AM NH0 C/P 80A
Item #:
C215167
Supplier Part #: C215167
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current, it must be handled by a qualified professional.
Lead free contact blades; Dimensions according to DIN 43 620 Parts 1 to 4; VDE 0636 Part 201; 0% cadmium; IEC 60269-1 and -2
$222.47
/EA
NOT CURRENTLY IN STOCK
NH 000 50A 500V GG SGL
Item #:
C222849
Supplier Part #: C222849
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
0% cadmium; Isolated metal gripping lugs (SGL); IEC 60269-1 and -2; Dimensions according to DIN 43 620 Parts 1 to 4; Lead free contact blades; Double indicator; VDE 0636 Part 201
$130.06
/EA
NOT CURRENTLY IN STOCK
NH 000 10A 400V GG
Item #:
C223677
Supplier Part #: C223677
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.
VDE 0636 Part 201; 0% cadmium; Non-isolated gripping lugs; IEC 60269-1 and -2; Lead free contact blades; Dimensions according to DIN 43 620 Parts 1 to 4; Double indicator
$130.06
/EA
NOT CURRENTLY IN STOCK
NH 000 80A 400V GG SGL
Item #:
C223700
Supplier Part #: C223700
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.
Double indicator; 0% cadmium; Dimensions according to DIN 43 620 Parts 1 to 4; VDE 0636 Part 201; Isolated metal gripping lugs (SGL); IEC 60269-1 and -2; Lead free contact blades
$130.06
/EA
NOT CURRENTLY IN STOCK
NH 1 200A 400V GG SGL
Item #:
C223723
Supplier Part #: C223723
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents. Rated Power Dissipation values of Mersen NH fuse-links 400VAC are below the maximum values required by standard IEC 60269.
Dimensions according to DIN 43 620 Parts 1 to 4; VDE 0636 Part 201; IEC 60269-1 and -2; 0% cadmium; Double indicator; Lead free contact blades; Isolated metal gripping lugs (SGL)
$229.14
/EA
NOT CURRENTLY IN STOCK
NH 3 355A 690V GG
Item #:
C228507
Supplier Part #: C228507
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Lead free contact blades; VDE 0636 Part 201; IEC 60269-1 and -2; Double indicator; Non-isolated gripping lugs; Dimensions according to DIN 43 620 parts 1 to 4; 0% cadmium
$468.79
/EA
NOT CURRENTLY IN STOCK
NH 0 160A 500V AM
Item #:
C232509
Supplier Part #: C232509
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
Dimensions according to DIN 43 620 parts 1 to 4; IEC 60269-1 and -2; Non-isolated gripping lugs; 0% cadmium; Double indicator; VDE 0636 Part 201; Lead free contact blades
$160.21
/EA
NOT CURRENTLY IN STOCK
NH 2 300A 500V GG SGL
Item #:
D201345
Supplier Part #: D201345
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
VDE 0636 Part 201; Double indicator; IEC 60269-1 and -2; Lead free contact blades; Non-isolated gripping lugs; 0% cadmium; Dimensions according to DIN 43 620 parts 1 to 4
$232.78
/EA
NOT CURRENTLY IN STOCK
