Browse Categories

Search in Category

Fuses

Search Filters

  • 0.55 lb x

Filter Your Search

Show Attribute Brand

Shop by Category

Loading...

Fuses

Power Products/Fuses 
Viewing Page 1 of 2 (13 results)
H TD FUSE 600V 70A CRS

H TD FUSE 600V 70A CRS

Item #: CRS70

Supplier Part #: CRS70
Brand: Mersen

Mersen CRN and CRS fuses are standard fuses, Type D, with 10kA short circuit rating. Type D fuses satisfy the Canadian Electrical Code requirement for low melting-point fuses

CSA Certified; Type D fuses satisfy the Canadian Electrical Code requirement for low melting-point fuses

$275.79 /EA
NOT CURRENTLY IN STOCK
H TD FUSE 600V 80A CRS

H TD FUSE 600V 80A CRS

Item #: CRS80

Supplier Part #: CRS80
Brand: Mersen

Mersen CRN and CRS fuses are standard fuses, Type D, with 10kA short circuit rating. Type D fuses satisfy the Canadian Electrical Code requirement for low melting-point fuses

Type D fuses satisfy the Canadian Electrical Code requirement for low melting-point fuses; CSA Certified

$275.79 /EA
NOT CURRENTLY IN STOCK
H TD FUSE 600V 90A CRS

H TD FUSE 600V 90A CRS

Item #: CRS90

Supplier Part #: CRS90
Brand: Mersen

Mersen CRN and CRS fuses are standard fuses, Type D, with 10kA short circuit rating. Type D fuses satisfy the Canadian Electrical Code requirement for low melting-point fuses

Type D fuses satisfy the Canadian Electrical Code requirement for low melting-point fuses; CSA Certified

$275.79 /EA
NOT CURRENTLY IN STOCK
H FUSE 600V 100A NRS

H FUSE 600V 100A NRS

Item #: NRS100

Supplier Part #: NRS100
Brand: Mersen

Mersen NRN (250V) and NRS (600V) fuses are standard non-time delay fuses, with a 10kA short circuit rating. 250 Volt NRN15 through NRN60 fuses are certified as Type "P" fuses, satisfying the Canadian Electrical Code for low melting-point non-time delay fuses. Also qualifying for Type "P" are OTN15 through OTN60, which are Class K-5 fuses with a 50kA short circuit rating (found in the OT/OTS fuse section).

250V and 600V applications; Type “P” (15 – 60A); Non-time delay

$145.28 /EA
NOT CURRENTLY IN STOCK
H FUSE 600V 70A NRS

H FUSE 600V 70A NRS

Item #: NRS70

Supplier Part #: NRS70
Brand: Mersen

Mersen NRN (250V) and NRS (600V) fuses are standard non-time delay fuses, with a 10kA short circuit rating. 250 Volt NRN15 through NRN60 fuses are certified as Type "P" fuses, satisfying the Canadian Electrical Code for low melting-point non-time delay fuses. Also qualifying for Type "P" are OTN15 through OTN60, which are Class K-5 fuses with a 50kA short circuit rating (found in the OT/OTS fuse section).

250V and 600V applications; Type “P” (15 – 60A); Non-time delay

$145.28 /EA
NOT CURRENTLY IN STOCK
H FUSE 600V 80A NRS

H FUSE 600V 80A NRS

Item #: NRS80

Supplier Part #: NRS80
Brand: Mersen

Mersen NRN (250V) and NRS (600V) fuses are standard non-time delay fuses, with a 10kA short circuit rating. 250 Volt NRN15 through NRN60 fuses are certified as Type "P" fuses, satisfying the Canadian Electrical Code for low melting-point non-time delay fuses. Also qualifying for Type "P" are OTN15 through OTN60, which are Class K-5 fuses with a 50kA short circuit rating (found in the OT/OTS fuse section).

Type “P” (15 – 60A); 250V and 600V applications; Non-time delay

$145.28 /EA
NOT CURRENTLY IN STOCK
H FUSE 600V 90A NRS

H FUSE 600V 90A NRS

Item #: NRS90

Supplier Part #: NRS90
Brand: Mersen

Mersen NRN (250V) and NRS (600V) fuses are standard non-time delay fuses, with a 10kA short circuit rating. 250 Volt NRN15 through NRN60 fuses are certified as Type "P" fuses, satisfying the Canadian Electrical Code for low melting-point non-time delay fuses. Also qualifying for Type "P" are OTN15 through OTN60, which are Class K-5 fuses with a 50kA short circuit rating (found in the OT/OTS fuse section).

Non-time delay; 250V and 600V applications; Type “P” (15 – 60A)

$145.28 /EA
NOT CURRENTLY IN STOCK
600V 100A 7 7/8x1 5/16 K5FUSE

600V 100A 7 7/8x1 5/16 K5FUSE

Item #: OTS100

Supplier Part #: OTS100
Brand: Mersen

One-Time OTS general purpose fuses provide low cost protection for feeder and branch-circuits serving lighting, heating, and other non-motor loads. OTS fuses will safely interrupt available short circuit currents up to 50,000 amperes in all ratings. OTS fuses are not rejection fuses and care should be taken to ensure that replacement fuses do not have lower interrupting ratings than original fuses.

Residential and small commercial installations; Feeders; Low cost for high protection value; Easy to read imprint label for quick recognition and replacement; Branch circuits; UL Listed to Standard 248-9 File E2137; CSA Certified to Standard C22.2 No. 248.9 (The Canadian Electrical Code requires these fuses in ratings 15 through 60A to be of the low melting point design; use OTN 15-60.); Self-certified for DC per UL248; Resistive heating

$59.11 /EA
NOT CURRENTLY IN STOCK
600V 70A 7 7/8x1 5/16 K5 FUSE

600V 70A 7 7/8x1 5/16 K5 FUSE

Item #: OTS70

Supplier Part #: OTS70
Brand: Mersen

One-Time OTS general purpose fuses provide low cost protection for feeder and branch-circuits serving lighting, heating, and other non-motor loads. OTS fuses will safely interrupt available short circuit currents up to 50,000 amperes in all ratings. OTS fuses are not rejection fuses and care should be taken to ensure that replacement fuses do not have lower interrupting ratings than original fuses.

Self-certified for DC per UL248; UL Listed to Standard 248-9 File E2137; CSA Certified to Standard C22.2 No. 248.9 (The Canadian Electrical Code requires these fuses in ratings 15 through 60A to be of the low melting point design; use OTN 15-60.); Residential and small commercial installations; Low cost for high protection value; Easy to read imprint label for quick recognition and replacement; Resistive heating; Feeders; Branch circuits

$64.83 /EA
NOT CURRENTLY IN STOCK
600V 75A 7 7/8x1 5/16 K5 FUSE

600V 75A 7 7/8x1 5/16 K5 FUSE

Item #: OTS75

Supplier Part #: OTS75
Brand: Mersen

One-Time OTS general purpose fuses provide low cost protection for feeder and branch-circuits serving lighting, heating, and other non-motor loads. OTS fuses will safely interrupt available short circuit currents up to 50,000 amperes in all ratings. OTS fuses are not rejection fuses and care should be taken to ensure that replacement fuses do not have lower interrupting ratings than original fuses.

Easy to read imprint label for quick recognition and replacement; CSA Certified to Standard C22.2 No. 248.9 (The Canadian Electrical Code requires these fuses in ratings 15 through 60A to be of the low melting point design; use OTN 15-60.); Branch circuits; UL Listed to Standard 248-9 File E2137; Feeders; Residential and small commercial installations; Resistive heating; Self-certified for DC per UL248; Low cost for high protection value

$65.72 /EA
NOT CURRENTLY IN STOCK
  • 1
  • 2
  • NEXT »