Browse Categories

Search in Category

Fuses

Search Filters

  • 3000 V x

Filter Your Search

Show Attribute Brand

Shop by Category

Loading...

Fuses

Power Products/Fuses 
Viewing Page 1 of 1 (9 results)
3.0kV 175A TYPE 10, MV CAP

3.0kV 175A TYPE 10, MV CAP

Item #: A300C175-10

Supplier Part #: A300C175-10
Brand: Mersen

Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products

Direct mount; Clip style mount; Bus mount; ANSI C37-41; Non-venting for silent operation; High interrupting capacity; Current limitation; Blown-fuse indication

$519.25 /EA
NOT CURRENTLY IN STOCK
3.0kV 100A TYPE 10, MV CAP

3.0kV 100A TYPE 10, MV CAP

Item #: A300C100-10

Supplier Part #: A300C100-10
Brand: Mersen

Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products

Clip style mount; High interrupting capacity; ANSI C37-41; Non-venting for silent operation; Blown-fuse indication; Bus mount; Direct mount; Current limitation

$443.94 /EA
NOT CURRENTLY IN STOCK
3.0KV, 115 AMPS, TYPE 60,MV CA

3.0KV, 115 AMPS, TYPE 60,MV CA

Item #: A300C115-60

Supplier Part #: A300C115-60
Brand: Mersen

Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products

Non-venting for silent operation; Blown-fuse indication; ANSI C37-41; Current limitation; Clip style mount; Direct mount; Bus mount; High interrupting capacity

$480.26 /EA
NOT CURRENTLY IN STOCK
3.0KV, 175 AMPS, TYPE 60,MV CA

3.0KV, 175 AMPS, TYPE 60,MV CA

Item #: A300C175-60

Supplier Part #: A300C175-60
Brand: Mersen

Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products

Bus mount; Current limitation; ANSI C37-41; Non-venting for silent operation; Clip style mount; Direct mount; High interrupting capacity; Blown-fuse indication

$519.25 /EA
NOT CURRENTLY IN STOCK
3.0kV 125A TYPE 60, MV CAP

3.0kV 125A TYPE 60, MV CAP

Item #: A300C125-60

Supplier Part #: A300C125-60
Brand: Mersen

Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products

Blown-fuse indication; High interrupting capacity; Clip style mount; Bus mount; ANSI C37-41; Current limitation; Non-venting for silent operation; Direct mount

$519.25 /EA
NOT CURRENTLY IN STOCK
3.0KV, 130 AMPS, TYPE 60,MV CA

3.0KV, 130 AMPS, TYPE 60,MV CA

Item #: A300C130-60

Supplier Part #: A300C130-60
Brand: Mersen

Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products

ANSI C37-41; Bus mount; Non-venting for silent operation; High interrupting capacity; Blown-fuse indication; Current limitation; Direct mount; Clip style mount

$519.25 /EA
NOT CURRENTLY IN STOCK

3.0kV 150A TYPE 10, MV CAP

Item #: A300C150-10

Supplier Part #: A300C150-10
Brand: Mersen

Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products

High interrupting capacity; Direct mount; Current limitation; Bus mount; Clip style mount; ANSI C37-41; Blown-fuse indication; Non-venting for silent operation

$519.25 /EA
NOT CURRENTLY IN STOCK
3.0KV 150A TYPE 21 MV CAP

3.0KV 150A TYPE 21 MV CAP

Item #: A300C150-21

Supplier Part #: A300C150-21
Brand: Mersen

Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products

Direct mount; Bus mount; High interrupting capacity; Clip style mount; Non-venting for silent operation; ANSI C37-41; Current limitation; Blown-fuse indication

$403.95 /EA
NOT CURRENTLY IN STOCK
3.0kV 150A TYPE 60, MV CAP

3.0kV 150A TYPE 60, MV CAP

Item #: A300C150-60

Supplier Part #: A300C150-60
Brand: Mersen

Mersen capacitor fuses are designed to ANSI C37-41. They are currentlimiting operating without noise or discharge and are designed to be used indoors in a general purpose enclosure or outdoors in a weatherproof enclosure. These are non-disconnecting fuses requiring the use of a disconnect switch. These capacitor fuses provide both short circuit and overload protection and are intended to protect against capacitor case rupture or dielectric failure within the capacitor. The various mounting configurations offer manufacturers a wide range of cost/space saving solutions and a large choice of equivalent products

Blown-fuse indication; Direct mount; High interrupting capacity; Bus mount; ANSI C37-41; Clip style mount; Non-venting for silent operation; Current limitation

$519.25 /EA
NOT CURRENTLY IN STOCK