Search in Category
Fuses
Search Filters
-
NH0 x
Filter Your Search
Brand
Country Of Origin
Voltage
Shop by Category
Loading...
Fuses
Power ProductsFuses
Viewing Page 1 of 12
(119 results)
BASE NH 0-EP F/TORN. 2P
Item #:
C214661
Supplier Part #: C214661
Brand:
Mersen
NH fuse-bases are available for delivery in single-pole and three-pole designs and can be closely mounted in parallel rows. Each three-pole base is upplied with two phase-partition walls. NH fuse-links plugon covers which clip onto the contact springs can also be supplied for these bases. Plastic fuse-bases sizes 00 to 3 have a single-part plastic base while size 4 has a metal baseplate with 2 ceramic bases. The stable silver-plated contact springs are made of electrolytic copper and formed from one piece. Separate springing is provided by highly resilient captive steel springs, making the contact invulnerable to high thermal stress. Size 4 NH fuse-bases are designed for size 4 fuse-links with 8 mm contact blades. A microswitch (250VAC/10A, terminal size 6.3x0.8mm) can be used with NH fuse-links with striker, it operates when fuse melts or where there is no fuse-link. Indirect touch protection fuse bases no microswitch possible. Rated impulse withstand voltage Uimp 6kV / 8kV (sizes 00 / 0-4)
Polyamide insulating bases; High-pressure spring contacts; IEC 60269 Compliance; Dimensions in accordance with DIN 43620; Multipolar bases possible by direct linkage in 00 size and with separator accessory in sizes 0, 1, 2 and 3; Screw or rail mounting; DIN VDE 0636-2, 0636-21; Silver-plated contacts
$259.91
/EA
NOT CURRENTLY IN STOCK
NH 0 40A 500V GG SGL
Item #:
C216202
Supplier Part #: C216202
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
IEC 60269-1 and -2; Dimensions according to DIN 43 620 Parts 1 to 4; Lead free contact blades; Double indicator; 0% cadmium; Isolated metal gripping lugs (SGL); VDE 0636 Part 201
$161.60
/EA
NOT CURRENTLY IN STOCK
BASE NH 0-EP F/RAIL. 3P
Item #:
C217214
Supplier Part #: C217214
Brand:
Mersen
NH fuse-bases are available for delivery in single-pole and three-pole designs and can be closely mounted in parallel rows. Each three-pole base is upplied with two phase-partition walls. NH fuse-links plugon covers which clip onto the contact springs can also be supplied for these bases. Plastic fuse-bases sizes 00 to 3 have a single-part plastic base while size 4 has a metal baseplate with 2 ceramic bases. The stable silver-plated contact springs are made of electrolytic copper and formed from one piece. Separate springing is provided by highly resilient captive steel springs, making the contact invulnerable to high thermal stress. Size 4 NH fuse-bases are designed for size 4 fuse-links with 8 mm contact blades. A microswitch (250VAC/10A, terminal size 6.3x0.8mm) can be used with NH fuse-links with striker, it operates when fuse melts or where there is no fuse-link. Indirect touch protection fuse bases no microswitch possible. Rated impulse withstand voltage Uimp 6kV / 8kV (sizes 00 / 0-4)
Silver-plated contacts; IEC 60269 Compliance; Polyamide insulating bases; Multipolar bases possible by direct linkage in 00 size and with separator accessory in sizes 0, 1, 2 and 3; Screw or rail mounting; DIN VDE 0636-2, 0636-21; High-pressure spring contacts; Dimensions in accordance with DIN 43620
$468.33
/EA
NOT CURRENTLY IN STOCK
NH 0 80A 500V GG
Item #:
C219284
Supplier Part #: C219284
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
Lead free contact blades; IEC 60269-1 and -2; Non-isolated gripping lugs; VDE 0636 Part 201; 0% cadmium; Dimensions according to DIN 43 620 parts 1 to 4; Double indicator
$150.42
/EA
NOT CURRENTLY IN STOCK
NH 0 200A 500V GG
Item #:
C229611
Supplier Part #: C229611
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
0% cadmium; Dimensions according to DIN 43 620 parts 1 to 4; VDE 0636 Part 201; Non-isolated gripping lugs; Lead free contact blades; Double indicator; IEC 60269-1 and -2
$156.31
/EA
NOT CURRENTLY IN STOCK
NH 0 160A 500V AM
Item #:
C232509
Supplier Part #: C232509
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "aM" NH fuse-links are partial-range breaking capacity fuse-links, used to protect motor circuits as they are strongly current-limiting and have low power losses. They interrupt currents from 6.3 times In up to their maximum breaking capacity and are therefore suited for short-circuit protection only. They must be associated with other switchgear for protection against overloads. These fuse-links can have a rated current equal to the motor's nominal current.
Dimensions according to DIN 43 620 parts 1 to 4; IEC 60269-1 and -2; Non-isolated gripping lugs; 0% cadmium; Double indicator; VDE 0636 Part 201; Lead free contact blades
$160.21
/EA
NOT CURRENTLY IN STOCK
6,9 URD 0 PV 0315
Item #:
E320279
Supplier Part #: E320279
Brand:
Mersen
The 690/700V Protistor® fuse-links provide maximum flexibility in equipment design and ultimate protection for today's power conversion equipment. These NH style fuse-links are defined as per DIN 43620/00 for a worldwide acceptance into NH modular system fuse-holders, fuse switch disconnectors for direct installation. The Protistor® have been engineered to provide state-of-the-art protection for semiconductors diodes, thyristors, GTO's and IGBT devices. Fuses are assembled with pure silver, die-cut elements embedded in solidified sand, which helps control arcing characteristics for a lower I²t and high interrupting rating level. All contact surfaces are silver plated and all hardware is non-magnetic. Each fuse-link can be equipped with a low voltage trip-indicator which can operate a field mountable microswitch.
aR Class according to VDE 636-23 and IEC 60269-4; Multiple body sizes; UL/CSA Recognized Component; Ultra fast acting; Superior cycling capability; IEC 60269-4 Compliance; Very low I²t for improved semiconductor protection; Indication system with double indicator; Current limiting
$736.70
/EA
NOT CURRENTLY IN STOCK
BASE NH 0-EP F/TORN. 3P
Item #:
G215171
Supplier Part #: G215171
Brand:
Mersen
NH fuse-bases are available for delivery in single-pole and three-pole designs and can be closely mounted in parallel rows. Each three-pole base is upplied with two phase-partition walls. NH fuse-links plugon covers which clip onto the contact springs can also be supplied for these bases. Plastic fuse-bases sizes 00 to 3 have a single-part plastic base while size 4 has a metal baseplate with 2 ceramic bases. The stable silver-plated contact springs are made of electrolytic copper and formed from one piece. Separate springing is provided by highly resilient captive steel springs, making the contact invulnerable to high thermal stress. Size 4 NH fuse-bases are designed for size 4 fuse-links with 8 mm contact blades. A microswitch (250VAC/10A, terminal size 6.3x0.8mm) can be used with NH fuse-links with striker, it operates when fuse melts or where there is no fuse-link. Indirect touch protection fuse bases no microswitch possible. Rated impulse withstand voltage Uimp 6kV / 8kV (sizes 00 / 0-4)
Silver-plated contacts; DIN VDE 0636-2, 0636-21; Multipolar bases possible by direct linkage in 00 size and with separator accessory in sizes 0, 1, 2 and 3; Dimensions in accordance with DIN 43620; Polyamide insulating bases; High-pressure spring contacts; Screw or rail mounting; IEC 60269 Compliance
$420.63
/EA
NOT CURRENTLY IN STOCK
BASE NH 0-PP F/TORN. 3P
Item #:
G217724
Supplier Part #: G217724
Brand:
Mersen
NH fuse-bases are available for delivery in single-pole and three-pole designs and can be closely mounted in parallel rows. Each three-pole base is upplied with two phase-partition walls. NH fuse-links plugon covers which clip onto the contact springs can also be supplied for these bases. Plastic fuse-bases sizes 00 to 3 have a single-part plastic base while size 4 has a metal baseplate with 2 ceramic bases. The stable silver-plated contact springs are made of electrolytic copper and formed from one piece. Separate springing is provided by highly resilient captive steel springs, making the contact invulnerable to high thermal stress. Size 4 NH fuse-bases are designed for size 4 fuse-links with 8 mm contact blades. A microswitch (250VAC/10A, terminal size 6.3x0.8mm) can be used with NH fuse-links with striker, it operates when fuse melts or where there is no fuse-link. Indirect touch protection fuse bases no microswitch possible. Rated impulse withstand voltage Uimp 6kV / 8kV (sizes 00 / 0-4)
High-pressure spring contacts; DIN VDE 0636-2, 0636-21; IEC 60269 Compliance; Multipolar bases possible by direct linkage in 00 size and with separator accessory in sizes 0, 1, 2 and 3; Dimensions in accordance with DIN 43620; Silver-plated contacts; Polyamide insulating bases; Screw or rail mounting
$504.28
/EA
NOT CURRENTLY IN STOCK
NH 0 6A 500V GG
Item #:
H213148
Supplier Part #: H213148
Brand:
Mersen
The NH system is classified among plug-in fuse systems and is composed of , fuse-base (possibly including terminal covers and phase barriers) , fuse-link with blade contact , fuse-link replacement device (LV HRC fuse puller) Since the design of this system cannot guarantee non-interchangeability of rated current it must be handled by a qualified professional. Type "gG" NH fuse-links are full range breaking capacity fuse-links and are used to protect cables and equipment. They can interrupt any current surge, from the lowest fusing current up to their breaking capacity, and so can be used alone as protection. They also protect electrical devices and industrial set-ups from the electrodynamic effects of very high short-circuit currents.
0% cadmium; VDE 0636 Part 201; Dimensions according to DIN 43 620 parts 1 to 4; Non-isolated gripping lugs; Lead free contact blades; Double indicator; IEC 60269-1 and -2
$147.03
/EA
NOT CURRENTLY IN STOCK
