Search in Category
Filter Your Search










Shop by Category
Networking Equipment
EtherNet/IP Adapter/Slave CANopen Slave
Proven and tested with all PLC manufacturers; Fast copying of cyclic I/O data between the two networks (10-15 ms)
CABLE ETHERNET TRL FC (20 M MIN.)
SIMATIC NET, IWLAN RCOAX SPACER 85MM
SIMATIC NET,IE TRAILING CON CABLE,3M
Anybus Communicator RS232/422/485 - Ethe
EtherNet/IP & Modbus TCP/IP 2-port
Pre-defined for Modbus RTU. Avoid the hassle of scripting and serial Modbus frame building with the 6-step Modbus RTU wizard; Convert almost any RS-232/422/485 Request/Response or Produce/Consume protocol in just a few minutes — For example Modbus RTU, ASCII, DF1; No hardware or software changes are required for the connected automation device
PROFINET IRT 2 Port
Compatible with PLCs from leading manufacturers such as Siemens, Rockwell, Schneider Electric etc; Convert almost any RS-232/422/485 Request/Response or Produce/Consume protocol in just a few minutes; No hardware or software changes are required for the connected automation device
PROFIBUS DP-V0 Master
Fast, dynamic transfer of fieldbus data to e.g. SCADA/HMI/Enterprise level systems based on Microsoft Windows, via the included Anybus OPC server
Anybus X-gateway - Modbus TCP Server ???
Fast copying of cyclic I/O data between the two networks (10-15 ms); Proven and tested with all PLC manufacturers
PROFIBUS DP-V0 Slave
Fast copying of cyclic I/O data between the two networks (10-15 ms); Proven and tested with all PLC manufacturers
PROFINET I/O Slave CANopen Slave
Proven and tested with all PLC manufacturers; Fast copying of cyclic I/O data between the two networks (10-15 ms)
AS-interface Master Modbus RTU Slave
Fast copying of cyclic I/O data between the two networks (10-15 ms); Proven and tested with all PLC manufacturers; Powerful Master interface eliminates the need for a PLC controller on the AS-Interface network
