Browse Categories

Filter Your Search

Category Group

Shop by Category

Search Results

Searching for: mersen
Viewing Page 3 of 942 (11,296 results)
SAFETY COVER FOR LARGE MPDB

SAFETY COVER FOR LARGE MPDB

Item #: MPDBC6869

Brand: Mersen

The Next Generation Power Distribution Block (PDB). Mersen power distribution blocks provide a safe and easy method of splicing cables, splitting primary power into secondary circuits and fulfilling requirements for fixed junction tap-off points. All blocks are UL and CSA approved while meeting spacing requirements for feeder and branch circuits in conjunction with UL508A and the National Electrical Code®. PDB options include single or dual conductor primary inputs and up to 30 secondary outputs. Specialty blocks are available allowing for up to 7 primary inputs. The MPDB series is offered in three size categories miniature (MPDB62 and MPDB63 series), intermediate (MPDB66 and MPDB67 series), and large (MPDB68 and MPDB69 series), in both aluminum and copper.

CSA Certified Class 6228 01; UL Listed to subject 1953, File E352417 unless noted otherwise

$26.98 /EA
NOT IN STOCK
500V 600A SEMICOND FUSE (A50Q

500V 600A SEMICOND FUSE (A50Q

Item #: A50QS600-4

Brand: Mersen

A50QS Amp-Trap® Form 101 fuses grew out of the need to improve the overall performance of semiconductor fuses in response to new equipment requirements. The A50QS encompasses the best protection features – lower I2t to provide better protection for equipment, longer life when subjected to cyclic loading and lower watts loss. A50QS is today’s best choice for the protection of dynamic solid state equipment such as motor drives, inverters, UPS, etc.

Lowest I2t for greatest protection of semiconductor circuits; Ultra compact sizes allow down-sizing of existing equipment; Low watts loss for cooler operation; Superior cycling ability gives an equipment design advantage; State-of-the-art protection for 500V equipment; DC Tested to UL standard 198L parameters (70-1200A); UL recognized component UL File 60314; AC: UL guide no. JFHR2; CSA Certified LR12636

$400.68 /EA
NOT IN STOCK
600V 30A SP CC ULTSFE W/IND

600V 30A SP CC ULTSFE W/IND

Item #: USCC1I

Brand: Mersen

Mersen UltraSafe Modular Fuse holders introduce a new level of safety for Class CC (USCC) and Midget 1-1/2" x 13/32" (USM) AC and DC rated fuses up to 30 amperes. UltraSafe holders qualify as “Fingersafe” under IEC and DIN standards to an IP20 grade of protection, including fuse changing (with the flick of a finger). UltraSafe holders are available in 1, 2, 3 or 4 poles, with or without visual blown-fuse indicators in each pole. Multi-pole units can also be field assembled by ordering pin-tie handles. UltraSafe holders save up to 15% mounting space and any combination can be snapped onto 35mm DIN-rail for extra savings in panel building time. UltraSafe holders with Class CC fuses chosen for Type “2” No Damage protection give one of the safest protection packages in the industry. UltraSafe body material is tough and durable polyamide, with exceptional insulating properties.

Compact footprint; ATM, DCT, ATMR recommended for DC applications; Quick, tool-free, easy fuse change outs; DIN-rail mounting; IP20 Finger-Safe (touch safe); Optional visual blown fuse Indicator lights; IEC 60269-2-1 and 60947-3 Compliant (USM only); CSA Certified C22.2; UL Listed to Standard 4248- 4 (class CC) and 4248-1 (midget), File E52283; UL Listed to standard 4248-18 (photovoltaic), File E347822

$52.28 /EA
NOT IN STOCK

MIDGT FUSEBLOCK 600V 30A 2P PP

Item #: 30322

Brand: Mersen

Mersen midget fuse blocks accommodate all 30 ampere 1-1/2” x 13/32” midget fuses. Class CC fuse blocks accommodate all 30 ampere Class CC fuses. A choice of box, screw, or pressure-plate connectors fit a wide range of stranded or solid copper wire. Insulators are glassfilled polycarbonate (GFPC) with verified dielectric strength in excess of 2500V. Fuse blocks feature a unique adder block which can be snapped onto 1-, 2- or 3-pole blocks to form multi-pole segmented blocks of as many poles as desired. All fuse clips are made of high conductivity tin-plated copper alloy.

UL listed, guide IZLT, File E52283; CSA certified class 6225, File 32169

$32.60 /EA
NOT IN STOCK
PWR DIS BLK AL INT 350A 2P 10

PWR DIS BLK AL INT 350A 2P 10

Item #: MPDB67532

Brand: Mersen

The Next Generation Power Distribution Block (PDB). Mersen power distribution blocks provide a safe and easy method of splicing cables, splitting primary power into secondary circuits and fulfilling requirements for fixed junction tap-off points. All blocks are UL and CSA approved while meeting spacing requirements for feeder and branch circuits in conjunction with UL508A and the National Electrical Code®. PDB options include single or dual conductor primary inputs and up to 30 secondary outputs. Specialty blocks are available allowing for up to 7 primary inputs. The MPDB series is offered in three size categories miniature (MPDB62 and MPDB63 series), intermediate (MPDB66 and MPDB67 series), and large (MPDB68 and MPDB69 series), in both aluminum and copper.

CSA Certified Class 6228 01; UL Listed to subject 1953, File E352417 unless noted otherwise

$256.08 /EA
NOT IN STOCK
600V 30A SEMICOND FUSE

600V 30A SEMICOND FUSE

Item #: A60Q30-2

Brand: Mersen

A60Q Amp-Trap® Form 101 high speed fuses feature the only 600V AC / DC rating in the industry of similar size (1-1/2" x 13/32") fuses protecting semiconductors. A60Q also has the lowest l2t of all similar fuses and excellent cycling ability. Applications include inverters and small equipment requiring extremely fast response to faults, without the need to carry sustained heavy overloads.

600V AC / DC rated; Lowest I2t of any fuse this size for greater protection; Excellent cycling ability gives advantage in equipment design; AC: UL guide JFHR2 File E60314; DC: UL file E60314; UL Recognized component

$45.57 /EA
NOT IN STOCK
250V 5A 1 1/2x13/32 MID TD

250V 5A 1 1/2x13/32 MID TD

Item #: TRM5

Brand: Mersen

Tri-Onic® TRM time-delay midget fuses are rated 250 volts AC and are offered in ampere ratings from 1/10 to 30A. They have 12 seconds time-delay at 200% rating to provide supplemental protection of small motors, small transformers and other high inrush loads, plus many other 250 volt applications. (Not for Branch Circuit Protection).

UL listed to standard 248-14 File E33925; CSA Certified to Standard C22.2 No. 248.14; 250VAC rating in all sizes up to 30A; Can be used with UltraSafeTM fuse holders; Numerous ratings for a wide variety of applications; 1 1/2” x 13/32” (10mm x 38mm) dimensions; Time-delay for circuits with high inrush currrent; Small transformers; Small motors; Lighting circuits; Control circuits

$15.10 /EA
NOT IN STOCK
600V 30A 2P CC ULTSFE W/IND

600V 30A 2P CC ULTSFE W/IND

Item #: USCC2I

Brand: Mersen

Mersen UltraSafe Modular Fuse holders introduce a new level of safety for Class CC (USCC) and Midget 1-1/2" x 13/32" (USM) AC and DC rated fuses up to 30 amperes. UltraSafe holders qualify as “Fingersafe” under IEC and DIN standards to an IP20 grade of protection, including fuse changing (with the flick of a finger). UltraSafe holders are available in 1, 2, 3 or 4 poles, with or without visual blown-fuse indicators in each pole. Multi-pole units can also be field assembled by ordering pin-tie handles. UltraSafe holders save up to 15% mounting space and any combination can be snapped onto 35mm DIN-rail for extra savings in panel building time. UltraSafe holders with Class CC fuses chosen for Type “2” No Damage protection give one of the safest protection packages in the industry. UltraSafe body material is tough and durable polyamide, with exceptional insulating properties.

IP20 Finger-Safe (touch safe); ATM, DCT, ATMR recommended for DC applications; Quick, tool-free, easy fuse change outs; Optional visual blown fuse Indicator lights; Compact footprint; DIN-rail mounting; CSA Certified C22.2; UL Listed to Standard 4248- 4 (class CC) and 4248-1 (midget), File E52283; IEC 60269-2-1 and 60947-3 Compliant (USM only); UL Listed to standard 4248-18 (photovoltaic), File E347822

$107.58 /EA
NOT IN STOCK
94865-FUSE,FORM 101

94865-FUSE,FORM 101

Item #: A70QS80-4

Brand: Mersen

A70QS Amp-Trap® high speed fuses were developed in response to the need for improved overall performance of 700V semiconductor fuses for new equipment requirements. A70QS fuses have lower I2t for better protection, longer life when subjected to cyclic loading, plus lower watts loss. A70QS is the best choice to protect dynamic solid state equipment such as motor drives, UPS, etc.

Ultra compact sizes allow down-sizing of existing equipment; Superior cycling ability for long, reliable life on high cyclic loading; Low watts loss for cooler operation; 700V AC/DC rating gives greater design versatility; Very Low I2t for improved protection of equipment; UL recognized component, AC/DC UL file E60314; AC: guide no. JFHR2; DC: tested to UL standard 198L parameters (35-800A); CSA certified File LR 12636

$252.15 /EA
IN STOCK
CC TD FUSE 600V 5A ATDR

CC TD FUSE 600V 5A ATDR

Item #: ATDR5

Brand: Mersen

Amp-Trap 2000 time-delay ATDR small-dimension fuses provide IEC Type 2 "no damage" protection to your facility's increasingly sensitive branch circuit components and small motors - minimizing the risk of fault-related damage. ATDR Class CC fuses deliver the best time-delay characteristics in their class with excellent cycling ability for small motor loads.

High-grade silica filler ensures fast arc quenching and optimum current-limitation; Time-delay for motor starting inrush currents without nuisance opening; High-visibility orange label ensures instant brand recognition, simplifies replacement; Rejection-style design prevents replacement errors (when used with recommended fuse blocks); Highly current-limiting for low peak let-thru current; Metal-embossed date and catalog number for traceability and lasting identification; Fiberglass body provides dimensional stability in harsh industrial settings; Improved cycling ability for frequent motor starts/stops without nuisance fuse opening; UL listed to standard 248-4 File E2137; DC listed to UL standard 248; CSA certified to standard C22.2 No. 248.4; Lighting, heating & general loads; Branch circuit protection; Contactors; Small motors

$46.13 /EA
IN STOCK
125V 5A 5X20MM FUSE

125V 5A 5X20MM FUSE

Item #: GGM5

Brand: Mersen

Up to 250V, Fast Acting, Glass, 5mm x 20mm

10A and 15A, 250VAC, UL Recognized; 4A through 8A, 125VAC, UL Listed and CSA Certified; 1/16A through 3A, 250VAC, UL Listed and CSA Certified; Fast-acting; Glass body; 5 mm x 20 mm

$3.11 /EA
IN STOCK
MOV FUSE 600V SR40KA-2

MOV FUSE 600V SR40KA-2

Item #: VSP40-2

Brand: Mersen

Mersen surge suppression fuses are specially designed to address the protection of SPD systems. Our surge suppression fuses have been specially designed to withstand 8/20 µSec surge pulses without opening, allowing the SPD system to react to the surge. All surge suppression fuses have a 8/20 µSec surge rating, not a continuous current rating. Under AC short circuit conditions these surge suppression fuses are very current limiting.

Various mounting configurations ferrules, blade, bolt-in, PC board mount; Surge ratings of 5-100kA 8/20 µSec capacity; VSP fuses rated 600VAC, 200kA I.R.; ANSI/UL 248 Special Purpose MOV Fuse, File E60314

$40.13 /EA
IN STOCK
  • « PREV
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • NEXT »