Filter Your Search

Brand

Shop by Category

Search Results

Searching for: littelfuse
Viewing Page 1 of 1 (11 results)
Fuse Holder 3 POLE INDICATING POWR-SAFE

Fuse Holder 3 POLE INDICATING POWR-SAFE

Item #: LPSC003ID

Brand: Littelfuse

Littelfuse POWR-SAFE “Dead Front” holders provide optimum protection to personnel. Indicating and non-indicating versions are available in 1,2,3, or 4 poles for Class CC and Midget fuses.

Compact design; Meets “Dead Front” requirements; Mountable on 35mm Din Rail; UL Listed for branch circuit protection (Class CC versions only); Ventilated design for cooler operation; Blown fuse identification (Indicating versions only); Easy installation and removal of fuses. No special fuse pullers or tools required.; Indicates above 80 volts (ID versions only)

Call
NOT IN STOCK
CCMR 3 Amp, 600V, Class CC, Littelfuse C

CCMR 3 Amp, 600V, Class CC, Littelfuse C

Item #: CCMR-003

Brand: Littelfuse

CCMR003 - CCMR Series

Available in larger sizes — from 35 to 60 amperes! No other 600V fuse is available with this current carrying capacity in a package this small.; Extremely current limiting — Reduces damage caused by heating and magnetic effects of short-circuit currents…stops damaging short-circuit faster than any mechanical protective device.; Provide superior protection in a fraction of the space required by other fuse classes. — For example, when 600V three-pole, 30 A Class R fuse blocks are replaced by Littelfuse Class CC fuse blocks, panel-mounting space is reduced approximately 70%.; Compared to other UL Listed fuses, Class CC dual element fuses are the most current limiting, rating for rating.; Provide Type II protection (no damage) to both NEMA-rated and the more sensitive IEC (International Electromechanical Commission) type motor circuit components.; Only true dual-element time-delay CC fuses specifically engineered for motor branch circuit protection.; 200,000 A.I.R. — Reliable interruption of all overcurrents up to 200,000 amperes.

Call
NOT IN STOCK
Motor Saver, 200-480VAC Input, 1-9A Low

Motor Saver, 200-480VAC Input, 1-9A Low

Item #: 777-LR-P2

Brand: Littelfuse

The 777 is a fully programmable electronic overload relay designed to protect any motor drawing 2-800 full load amps (external CTs are required above 90 amps). The 777 (family of products) is for 3-phase 200-480VAC applications, with several specialized units for other voltage ranges and unique applications. Common applications include conveyor systems, HVAC equipment, saws and grinders, fan motors, and almost any pumping application. Some unique applications include use with a Subtrol® equipped Franklin submersible motor to detect high motor temperatures and applications where a fast linear trip is required. All of the overload relays provide unsurpassed protection by combining overload, voltage, phase loss and reversal, voltage and current unbalance, power monitoring, and underload based on current in one package. For standalone applications, the units incorporate a 3-digit LED display that is used for programming, providing real-time operational information and displaying diagnostic codes to aid in troubleshooting a fault condition. The units also feature a communications port that can be used with communication modules listed in the 777 accessories section to form a Modbus, DeviceNet™, Profibus, or Ethernet network. Up to 99 units can be remotely monitored and controlled from a PC, PLC, or SCADA system, and data logging through a PC with the optional Solutions software. This capability allows for a simple, cost-effective way to meet new requirements for arc-flash safety.
Call
NOT IN STOCK
Current Transformers 200-480V STAG. RSTR

Current Transformers 200-480V STAG. RSTR

Item #: CT-0150-F10

Brand: Littelfuse

The CT Series combines a delay-on-make and delay-on-break time delay into one unit and may be used to control fan delays in heating and/or cooling equipment. The CT includes bypass circuitry to allow it to operate with cooling anticipators = 3000 ohms. It is designed to operate in 24VAC control circuits. Several CT modules may be combined to provide sequencing of any number of loads and sequencing off of the same loads, such as electric heating elements.
Call
NOT IN STOCK
Call
NOT IN STOCK
Fuse Holder CLASS R FUSE BLOCK 250V 30A

Fuse Holder CLASS R FUSE BLOCK 250V 30A

Item #: LFR250301C

Brand: Littelfuse

LFR250301C - LFR Series

DIN Rail releasable for all non-knife blade style fuses; Reinforcing clips are standard on all Class R fuse blocks; Only one hand is required to release from DIN Rail (lock open lock closed); Universal mounting holes make for easy replacement; Indication offered on most 250V and 600V versions; Clip designs maximize electrical contact and minimize heat rise

Call
NOT IN STOCK
1 POLE NON-INDICATING POWR-SAFE MIDGET H

1 POLE NON-INDICATING POWR-SAFE MIDGET H

Item #: LPSM001

Brand: Littelfuse

Littelfuse POWR-SAFE “Dead Front” holders provide optimum protection to personnel. Indicating and non-indicating versions are available in 1,2,3, or 4 poles for Midget fuses.

Blown fuse identification (Indicating versions only); Indicates above 80 volts (ID versions only); Ventilated design for cooler operation; UL Listed for branch circuit protection (Class CC versions only); Easy installation and removal of fuses. No special fuse pullers or tools required.; Mountable on 35mm Din Rail; Compact design; Meets “Dead Front” requirements

Call
NOT IN STOCK
2 POLE NON-INDICATING POWR-SAFE MIDGET H

2 POLE NON-INDICATING POWR-SAFE MIDGET H

Item #: LPSM002

Brand: Littelfuse

Littelfuse POWR-SAFE “Dead Front” holders provide optimum protection to personnel. Indicating and non-indicating versions are available in 1,2,3, or 4 poles for Midget fuses.

Mountable on 35mm Din Rail; UL Listed for branch circuit protection (Class CC versions only); Blown fuse identification (Indicating versions only); Meets “Dead Front” requirements; Easy installation and removal of fuses. No special fuse pullers or tools required.; Compact design; Indicates above 80 volts (ID versions only); Ventilated design for cooler operation

Call
NOT IN STOCK
3 POLE NON-INDICATING POWR-SAFE MIDGET H

3 POLE NON-INDICATING POWR-SAFE MIDGET H

Item #: LPSM003

Brand: Littelfuse

Littelfuse POWR-SAFE “Dead Front” holders provide optimum protection to personnel. Indicating and non-indicating versions are available in 1,2,3, or 4 poles for Midget fuses.

Easy installation and removal of fuses. No special fuse pullers or tools required.; Ventilated design for cooler operation; Blown fuse identification (Indicating versions only); Mountable on 35mm Din Rail; Compact design; Meets “Dead Front” requirements; Indicates above 80 volts (ID versions only); UL Listed for branch circuit protection (Class CC versions only)

Call
NOT IN STOCK